Epson LQ-570+ Handleiding productinformatie - Pagina 6

Blader online of download pdf Handleiding productinformatie voor {categorie_naam} Epson LQ-570+. Epson LQ-570+ 8 pagina's. Sdx acd manager 5.2 printer setup
Ook voor Epson LQ-570+: Product ondersteunings bulletin (20 pagina's), Product ondersteunings bulletin (5 pagina's), Installatiehandleiding (1 pagina's), Handmatig (12 pagina's), Specificaties (2 pagina's), Handmatig (8 pagina's), Product ondersteunings bulletin (16 pagina's), Servicehandleiding (49 pagina's), Installatiehandleiding (14 pagina's)

Pagina afdrukken

Epson LQ-570+ Handleiding productinformatie

LQ-570/1070

Interface timing

The figure below shows the timing for the parallel interface:

Interface Cards

can use optional interface boards to supplement your printer's

built-in parallel interface.

The Epson interfaces below are compatible with your printer:

! Model Numkr

I C823lOl

Option Specifications

Cut-sheet feeders

The asterisk (') in this section is a substitute for the last digit, which

varies according to country.

(14.4 Inches)

377 mm

(14.8 Inches)

367 mm

(14.4 m&es)

Note: Dimensions when mounted on the printer; includes printer

dimensions

Bin capan'ty

Single sheets:

Up to 50 sheets of 82-g/m' (22~lb) paper

Up to 150 sheets of

Envelopes:

Up to 25 (plain bond)

Up to 30 (air mail)

LQ-570/1070-6

Depth

434 mm

444mm

117.1 Inches1

434 mm

1.55 kg

(3.42 lb)

(17.1 Inches)

609 mm

0.75 kg

(24.0 Inches)

(17.5 Inches)

(1.85 lb)

434 mm

2.15 kg

(24.0 Inches)

(17.1 Inches)

(4.74 lb)

(22-lb) paper

Paper:

(7.17 to 8.50 Inches.)

0.07 to 0.10 mm

64 to 82 g/m'

Paper storage conditions:

Environmental

Temperature:

Humidity (without condensation):

Note:

conditions.

Envelope printing is only available with the C806381 cut-sheet

feeder, at normal operating conditions.

Command Changes from ESC/P

New Commands

The following are new commands that have been added to the

Set page length in defined unit

Select graphics mode

Define unit

Set absolute vertical print position

Print data as characters

Set page format

Assign character table

Set relative vertical print position

Print raster graphics

ESC.

Select font by pitch and point

Set horizontal motion

Deleted Commands

The following commands are not supported on Epson ESC/P 2

printers:

Select vertical tab channel

Select justification

8/20/91

I Envslopes

(6.50 to 9.49 inches)

0.16 to 0.52 mm

(17 to 22 Ibs)

Temperature: 18" to 22°C (64" to 72°F)

Humidity: 40% to 60%

Operation: 5" to 35°C (41' to 95°F)

Storage: -30" to 60°C (-22" to 140°F)

Operation: 15% to 80%

Storage: 5% to 90%

index

24-Pin Printers