Epson LQ-630 Installatiehandleiding - Pagina 2

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Epson LQ-630. Epson LQ-630 2 pagina's. 24-pin dot matrix printer
Ook voor Epson LQ-630: Specificaties (2 pagina's), Installatiehandleiding (2 pagina's), Start Here (2 pagina's)

Pagina afdrukken

Installing the Printer Software

For Windows Me, XP, or 2000 users

Note:

Installing the printer software for Windows XP or 2000 may require administrator

privileges. If you have problems, ask your administrator for more information.

1. Make sure that the printer is turned off.

2. Insert the printer software CD-ROM into the CD-ROM drive. The Install dialog box

appears.

Note:

If the Installer dialog box does not appear, double-click Setup.exe in the CD-ROM.

3. Select Install Software, and click

4. Follow the instructions on the screen.

For Windows 98, 95, or NT 4.0 users

Note:

Installing the printer software for Windows NT 4.0 may require administrator

privileges. If you have problems, ask your administrator for more information.

The examples in the following section are from the Windows 98 operating system.

They may vary in appearance from what actually appears on your screen;

however, the instructions are the same.

1. Make sure that the printer is turned off, then insert the printer software CD-ROM into

the CD-ROM drive. The install dialog box appears.

Note:

If the Installer dialog box does not appear, double-click Setup.exe in the CD-ROM.

2. Select Install Software, and click

3. Select your printer, then click OK and follow the instructions on the screen.

4. When prompted, insert your Windows CD-ROM, and click OK.

Note:

If your PC shipped with Windows pre-installed, setup may complete without

requiring the Windows CD-ROM, and your printer is ready to use.

If you receive a message saying the drive is not accessible, click Cancel and try

again.

If you are using Windows NT 4.0, go to step 5.

Getting More Information

Using the Reference Guide

The Reference Guide provides detailed information on the Printer's functions, optional

products, Printer software, troubleshooting, and technical specifications.

Follow these steps to access the Reference Guide from the CD-ROM:

1. Insert the printer software CD-ROM in the CD-ROM drive.

2. Double-click User Guides from the screen. The online guide dialog box appears.

Replacing the Ribbon Cartridge

Warning:

If you have just used the printer, the printer may be hot; let it cool for a few minutes

before touching it.

When printing becomes faint, you need to replace the ribbon cartridge. Follow the

steps below.

1. Make sure the printer is turned off and unplugged.

2. Open the printer cover and paper bail.

3. Hold the ribbon guide and move the print head slightly to the left.

4. Remove the ribbon cartridge by pulling the ribbon guide and then the body of the

cartridge forward.

5. Follow steps 5 - 10 in the Assembling the Printer section on the front of this Setup

Guide.

Note:

EPSON recommends the use of genuine EPSON ribbon cartridges (S015290).

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON

printer. EPSON is not responsible for any use of this information as applied to other printers. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product

or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with SEIKO EPSON CORPORATION's operating and maintenance instructions.

SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION. EPSON and EPSON ESC/P are registered trademarks and EPSON ESC/P2

is a trademark of SEIKO EPSON CORPORATION. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machines Corporation.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks.

5. Click Browse to select appropriate path for the printer driver, then click OK and

follow the instructions on the screen.

Note:

If you are using Windows NT 4.0, insert your Windows CD-ROM when prompted on

the screen.

6. Select the appropriate file in the folder, then click OK.

7. When prompted, insert the Printer Driver Software CD-ROM, then click Browse to

select appropriate path.

Note:

If you receive a message saying the drive is not accessible, click Cancel and try

again.

If a "System Error" message appears, click Cancel. The exact message differs

depending on your version of Windows.

If you are using Windows NT 4.0, you do not need to specify a path.

If you are using Windows 98, Printer Utility Setup may start. If it does, follow the

instructions on the screen.

8. Setup is complete. You are ready to use.

For DOS programs

To control the printer from DOS application programs, you need to select the printer

you are using.

If the list in your application does not include your printer, choose the first available

printer from the list below.

Choose the EPSON printer at the appropriate step in the installation or setup

procedure. If the list in your application does not include your printer, choose the first

available printer from the list below:

1) LQ-680/LQ-680 Pro

6) LQ-300+

2) LQ-670

7) LQ-1150

3) DLQ-3500

8) LQ-2070/2080

4) DLQ-3000+

9) LQ-2170/2180

5) LQ-580/LQ-570e

10) EPSON LQ printer

Once the printer software has been successfully installed onto your computer,

your printer is ready to use.

Error Indicators

If your printer stops working and one or more control panel lights are on or flashing or

the printer beeps, use the following table to diagnose and fix the problem.

For other patterns, refer to the Reference Guide.

State of

Beep

Problem

panel lights

pattern

Solution

n Power

No paper is loaded in the selected paper source.

n Pause

Load paper in the selected paper source; the Paper Out and Pause light go off and the

n Paper Out

printer resumes printing.

n Power

Paper is not loaded correctly.

n Pause

Remove and reload your paper correctly, then press the Pause button. See Paper Handling

f Paper Out

in the online Reference Guide for paper-loading instructions.

Paper is not fully ejected.

Press the Load/Eject button to eject the sheet.

n Power

The paper release lever is set to the wrong position.

n Pause

Set the paper release lever to the position for the paper source you want to use. If paper

o Paper Out

from another paper source is currently in the paper path, press the Load/Eject button to

eject the paper; then move the paper release lever to the desired position.

o = off, n = on, f = flashing

= short series of beeps (three beeps)

Printed in XXXX