Crow EDS-2000 Installatie-instructies en gebruikershandleiding - Pagina 16
Blader online of download pdf Installatie-instructies en gebruikershandleiding voor {categorie_naam} Crow EDS-2000. Crow EDS-2000 20 pagina's. Outdoor pir + mw detector
Ook voor Crow EDS-2000: Installatie-instructies en gebruikershandleiding (20 pagina's)
Pagina afdrukken
9
Operation
Note! Connect the EDS-2000 to a positive Voltage output of 9.6 -16VDC source.
Use only a listed power limited source.
The detector shall be provided with minimum of 4 hours of standby power from either a
listed compatible control unit or power supply.
The detector is automatically operated once connected to power.
The LEDs start flashing one at a time (side to side) for 30 seconds during the warm-up period
and after that it will turn off.
At this time the detector is ready for operation.
16