Epson R300 - Stylus Photo Color Inkjet Printer Snelle referentie - Pagina 2

Blader online of download pdf Snelle referentie voor {categorie_naam} Epson R300 - Stylus Photo Color Inkjet Printer. Epson R300 - Stylus Photo Color Inkjet Printer 6 pagina's. Product information guide
Ook voor Epson R300 - Stylus Photo Color Inkjet Printer: Brochure (2 pagina's), Productinformatieblad (4 pagina's), Handmatig (12 pagina's), Gebruikershandleiding (13 pagina's), Snelle referentie (4 pagina's), Brochure (2 pagina's), Gebruikershandleiding (12 pagina's), Product ondersteunings bulletin (6 pagina's), Product ondersteunings bulletin (1 pagina's), Brochure (2 pagina's), Handleiding voor installatie-instructies (12 pagina's), Instructiehandleiding (4 pagina's)

If you have the EPSON Stylus Photo R300M, you need to attach the preview monitor.

Unscrew the cap from the end of the screw on the base. Then remove the screw.

Unscrew cap

Position the monitor into the base as shown, lining up the holes for the screw.

Place monitor

in base and

line up holes

Push the screw through the holes (it can fit only one way) and screw the cap back onto the

end of the screw.

Remove the plastic cover from the printer.

Remove cover

Insert the tabs on the monitor base into the slots on the printer.

Attach monitor

base to printer

Remove the cap from the end of the monitor cable, then connect it to the preview monitor

port on the back of the printer.

Turn On the Printer

Plug the printer's power cord into a grounded electrical outlet.

STOP: Do not connect the printer to your computer yet. Wait until you are instructed

to connect the USB cable in section 5, "Install Software."

Press the

power button

to turn on the printer.

CAUTION: Never use an external

switch, such as a wall switch or

power strip switch, to turn the

printer on or off.

Remove screw

Connect to preview monitor port

continue