Epson R380 - Stylus Photo Color Inkjet Printer Handmatig - Pagina 7
Blader online of download pdf Handmatig voor {categorie_naam} Epson R380 - Stylus Photo Color Inkjet Printer. Epson R380 - Stylus Photo Color Inkjet Printer 13 pagina's. Ultra hi-definition photo printer
Ook voor Epson R380 - Stylus Photo Color Inkjet Printer: Start hier Handleiding (8 pagina's), Specificatieblad (6 pagina's), Technisch overzicht (11 pagina's), Brochure (2 pagina's), Onderdeellijst Handboek (8 pagina's)
Pagina afdrukken
Caution: Be sure to insert the CD/DVD tray while the printer is
turned on; this ensures that the print position will be adjusted
automatically.
Do not insert the CD/DVD tray while the printer is printing;
otherwise, your printer may be damaged or the surface of the CD
or DVD may become dirty or scratched.
Make sure the CD/DVD
tray slides under the tab
(on both sides)
Designing CDs and DVDs
You can use the Epson Print CD program (included on the
Printer Software CD-ROM) to create and print a design with
images, graphics, and text. See your Printer Basics manual or
on-screen User's Guide for instructions.
Printing Your Design
After you have created your design and loaded a CD or DVD,
follow these steps to print:
1. Open the File menu and select
2. Make sure
EPSON Stylus Photo R380 Series
or
Stylus Photo R380
3. Select
or
CD/DVD
CD/DVD Premium Surface
Media Type setting.
4. Select
as the Print Confirmation Pattern setting
None
(Windows) or Test Print Pattern setting (Macintosh).
5. Click
.
Print
Note: You can print on only one CD or DVD at a time. When the
Copies setting is set to 2 or more, remove each disc from the
tray after it has been printed, and then place the next CD or DVD
on the tray. Then press the
After you print, handle the CD or DVD carefully and allow the ink
to dry for at least 24 hours before playing the disc or inserting it in
a drive. Keep printed discs away from moisture and direct
sunlight.
After you finish printing on a CD/DVD, remove the CD/DVD tray
and set the front tray to the paper position by pushing up the tray
lever.
If you need to adjust the print position or color, see your
on-screen User's Guide or Printer Basics book.
Make sure the
arrow marks
are aligned
.
Print
(Windows)
(Macintosh) is selected.
as the
Start button to resume printing.
Replacing an Ink Cartridge
When you print with low or expended ink cartridges, you see
a message on the LCD screen telling you which cartridges are
low or expended.
You'll also see a message on your computer screen when you
print telling you which cartridge is low or expended.
When a cartridge is installed in the printer for more than six
months, you may need to replace it if printouts don't look
their best. If the quality doesn't improve after cleaning and
aligning the print head, you can replace the cartridge even if
the cartridge is not expended.
Checking the Ink Cartridge Status
Follow the steps below to check how much ink is left in your
cartridges.
Note: You can also check the ink cartridges using your computer;
see your Printer Basics manual or on-screen User's Guide for
instructions.
1. Press
to enter the Setup menu.
Setup
2. Press l or r to select
3. You see a screen showing the status of the ink cartridges:
The cartridges are identified as follows:
(black),
(light cyan),
LC
(cyan).
C
4. When you're done checking the ink cartridge status, press
. Press l or r to select
OK
Removing and Installing Ink Cartridges
Be sure you have a new ink cartridge before you begin. Once
you start replacing a cartridge, you must complete all the steps
in one session.
Caution: Leave the expended cartridge installed until you have
obtained a replacement, or the ink remaining in the print head
nozzles may dry out. To ensure good results, use genuine Epson
ink cartridges and do not refill them. Other products may cause
damage to your printer not covered by Epson's warranty.
10/06
Epson Stylus Photo R380
, then press
Ink Cartridge Status
(yellow),
Y
(light magenta),
(magenta),
LM
M
.
, then press
OK
OK
Epson Stylus Photo R380
.
OK
B
- 7