EPSON Stylus COLOR 400
Select EPSON Ink Jet Transparencies for great printouts of
overhead transparencies at the
setting.
Choose EPSON Iron-on Transfer Paper to print
images for transfer onto t-shirts, tablecloths,
Fine - 720 dpi
and more.
Use EPSON Photo Quality Self Adhesive Sheets to create
great quality labels at the
Replacing an Ink Cartridge
If a
B
black or
A
color ink out light flashes, the indicated
cartridge is low on ink. If the light stays on, the cartridge is
empty and you need to replace it.
Caution:
To ensure good results, use genuine EPSON
cartridges and do not refill them. Other products may
cause damage to your printer not covered by EPSON's
warranty.
Use these EPSON ink cartridges within six months of
installing them and before the expiration date on the package:
Black ink cartridge S020093
Color ink cartridge
S020089.
1. Make sure the printer is on and not printing, and that either
the
black or
color ink out light is flashing or on.
B
A
2. Lower the output tray and then raise the printer cover.
Caution:
For best results, don't replace an ink cartridge unless
its ink out light is flashing or on.
If ink runs out, you can't continue printing, even if ink
remains in the other cartridge.
R
If you press the
light is flashing or on, the printer cleans the print
heads, as described on page 11.
3. Press the
cleaning button and hold it for three seconds.
R
If you have to replace an ink cartridge before its ink out light
flashes or comes on (if the cartridge is too old, for instance),
press the
load/eject button and hold it for three seconds
E
instead of the
R
cleaning button.
The print heads move slightly left to the ink cartridge install
position and the
power light begins flashing. (The print
P
heads return to their home position if you don't proceed to
step 4 within 60 seconds.)
8 - EPSON Stylus COLOR 400
print quality
Normal - 360 dpi
print quality setting.
Fine - 720 dpi
cleaning button when no ink out
4. Pull up the ink cartridge clamp only for the cartridge you
want to replace. The cartridge rises up from its holder.
5. Lift the cartridge out of the printer and dispose of it
carefully.
Warning:
If ink gets on your hands, wash them thoroughly with
soap and water. If ink gets into your eyes, flush them
immediately with water.
6. Remove the new ink cartridge from its packaging. Then
remove only the disposable yellow portion of the tape seal as
shown here.
black cartridge
Caution:
You must remove the tape seal from the top of the
cartridge; leaving the tape on will permanently
damage it. Do not remove the clear seal from the
bottom of the cartridge; ink will leak out.
1/97
hw_pig.fm5 (Left) 1/2/97 10:34am
ink cartridge clamp
color cartridge
Pagina afdrukken