Epson Stylus Color 670 Installatiehandleiding - Pagina 2

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Epson Stylus Color 670. Epson Stylus Color 670 17 pagina's. Product support bulletin(s)
Ook voor Epson Stylus Color 670: Productinformatieblad (4 pagina's), Productinformatieblad (4 pagina's), Product ondersteunings bulletin (6 pagina's), Product ondersteunings bulletin (1 pagina's), Specificaties (2 pagina's), Productinformatie (12 pagina's), Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (2 pagina's), Product ondersteunings bulletin (4 pagina's), Product ondersteunings bulletin (7 pagina's)

Attaching the Paper Support

Insert the paper support into the slots at the rear of the printer.

Make sure that the printer is turned off. It is off when the P power

button protrudes slightly from the surface of the control panel.

Check the label on the back of the printer to make sure the voltage

required by the printer matches that of the electrical outlet you will be

plugging it into. Also, make sure that you have the correct power cable

for your power source.

Caution:

It is not possible to change the printer's voltage. If the rated voltage and

your outlet voltage do not match, contact your dealer for assistance. Do

not plug in the power cord.

If the power cord is not attached to the printer, connect it to the AC inlet

on the back of the printer.

Plug the power cord into a properly grounded electrical outlet.