Epson Stylus Color 800 Gebruikershandleiding - Pagina 20

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson Stylus Color 800. Epson Stylus Color 800 34 pagina's. Ms windows 3.x color printer drivers problems
Ook voor Epson Stylus Color 800: Gebruikershandleiding (38 pagina's), Specificatieblad (2 pagina's), Productinformatieblad (4 pagina's), Handmatig (11 pagina's), Handmatig (21 pagina's), Handleiding voor snelle installatie (9 pagina's), Product ondersteunings bulletin (4 pagina's), Product ondersteunings bulletin (6 pagina's), Handmatig (11 pagina's), Product ondersteunings bulletin (4 pagina's), Servicehandleiding (6 pagina's)

Close the Add/Remove Programs Properties window, close the Control

Panel, and then shut down the computer.

Setting Up the Printer

If you've been using your EPSON printer with your computer, the printer is

probably set up already. If so, make sure your system is turned off and

disconnect the printer from the computer. Also, make sure the printer

software has been deleted, as described above. Then go to "Connecting the

Cable" in the next section to attach the cable to your system.

If you're setting up a new printer, see the documentation that came with your

printer for instructions on unpacking it, installing ink cartridges, and loading

paper. Then return to this booklet for instructions on connecting the cable

and installing your printer software.

You can connect the USB/Parallel Adapter directly to a USB port on your

computer, or you can connect it to a USB hub connected to a port on your

computer. If you have any printing problems when the printer is connected

via a USB hub, try connecting your printer directly to the USB port on the

computer instead.