EPSON Stylus COLOR 800
To open the Spool Manager at any time, double-click the
Spool Manager4 icon in the EPSON program group or
folder.
You see the Spool Manager window:
menus
queue
When you send a job to your printer, your printer software
creates a temporary journal file, stores it in the C:\TEMP or
C:\WINDOWS\TEMP folder or directory, and assigns it to
a print queue. The software then sends the file to your
printer at the right time.
The Spool Manager window displays the status of your print
queues and journal files and lets you control them. Here are
some of the things you can do:
Hold or release a queue
Send journal files to your printer over a network
Hold, re-queue, or delete a journal file
Select the information you want to see in the Spool
Manager window
Prevent the Despooler popup window from appearing on
your screen whenever you print
Change your default spool directory
8 - EPSON Stylus COLOR 800
Deleting a Stalled Print Job
If you're having trouble printing, it may be because of a
stalled print job. Follow these steps to delete it so you can
continue printing:
1. Open the Spool Manager as described above.
2. Click on any print jobs marked Held, then open the
Document menu and click Delete.
3. Exit Spool Manager and try printing again.
Changing the Default Spool Directory
If you get an error message when you try to print, or
printing is very slow, you can try changing your default
spool directory. Follow these steps:
1. Make a directory on your hard drive where you want
Spool Manager to store journal files, for example,
C:\SPLTEMP.
journal file
2. Open the Spool Manager as described above.
3. Make sure EPSON Stylus COLOR 800 is selected, and
then choose Setup from the Queue menu. The Queue
Setup dialog box appears.
4. Change the spool directory to the one you created in
step 1. Also make sure Use Print Manager for this port is
checked. (If you don't see the Status Monitor when you
print, make sure it's unchecked.) Then click OK.
5. Choose Default Spool Directory from the Options menu.
6. In the dialog box, change the spool directory to the one
you created in step 1. Then click OK.
7. Close Spool Manager.
Using the Status Monitor
The Status Monitor, available only if you're using Windows
95, displays automatically when you send a job to the
printer. However, you can use it at any time to see how
much ink you have left. Follow these steps:
1. Access the Main printer settings dialog box as described
on page 6.
2. Click the Utility tab.
3. Click the Status Monitor icon. You see the Despooler
window with the Status Monitor at the bottom.
4. Check the amount of ink you have left. For more
information about the Despooler window, see the next
section.
If the Status Monitor doesn't appear on the Despooler
window, you may need to check your bidirectional spool
settings. Follow these steps:
1. Click Start, point to Settings, and then point to Printers.
1/97
Pagina afdrukken