Epson Stylus COLOR 860 Productinformatie - Pagina 11

Blader online of download pdf Productinformatie voor {categorie_naam} Epson Stylus COLOR 860. Epson Stylus COLOR 860 12 pagina's. Product support bulletin(s)
Ook voor Epson Stylus COLOR 860: Productinformatieblad (4 pagina's), Specificaties (2 pagina's), Cartridges vervangen (2 pagina's), Productinformatieblad (4 pagina's), Product ondersteunings bulletin (6 pagina's), Product ondersteunings bulletin (1 pagina's), Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (2 pagina's), Product ondersteunings bulletin (4 pagina's), Product ondersteunings bulletin (7 pagina's), Installatiehandleiding (17 pagina's)

Transporting the Printer

If you move your printer some distance, you need to prepare it

for transportation in its original box. Follow these steps:

To avoid damage, always leave the ink cartridges

installed when transporting the printer.

Be sure to remove the tape used in step 4 after installing

the printer in its new location.

1. Turn on the printer, wait until the print head locks in the

far right position, then turn off the printer.

2. Unplug the power cord from the electrical outlet. Then

disconnect the printer cable from the printer.

3. Remove any paper from the printer and remove the paper

support.

4. Open the printer cover. Secure the ink cartridge holder to

the printer with tape as shown, then close the printer cover.

Tape the ink cartridge holder

to the printer case

5. Push in the output tray extensions and close the tray.

6. Repack the printer and attachments in the original box

using the protective materials that came with it. See the

unpacking sheet that was packed with your printer.

Be sure to keep the printer level as you transport it.

After transporting the printer, remove the tape securing the

print head and test your printer. If you notice a decline in

print quality, clean the print head (see page 9); if output is

misaligned, align the print head (see page 10).