Epson Stylus Color 880 Installatiehandleiding - Pagina 12

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Epson Stylus Color 880. Epson Stylus Color 880 17 pagina's. Product support bulletin(s)
Ook voor Epson Stylus Color 880: Specificatieblad (2 pagina's), Product ondersteunings bulletin (6 pagina's), Product ondersteunings bulletin (1 pagina's), Productinformatieblad (4 pagina's), Specificatie (2 pagina's), Start Here (4 pagina's), Gebruikershandleiding (13 pagina's), Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (2 pagina's), Product ondersteunings bulletin (4 pagina's), Product ondersteunings bulletin (7 pagina's), Snelstarthandleiding (2 pagina's)

Checking the Printer

Before printing your first page, load plain paper in the printer and print a

nozzle check page to make sure that the printer is working correctly. If the

nozzle check is unsatisfactory, you may need to clean the print head.

Follow the steps below to load plain paper in the printer.

Lower the output tray and slide out the extension, then slide the left

edge guide so that the distance between the edge guides is slightly

wider than the width of your paper.

edge guide

Fan a stack of paper, then tap it on a flat surface to even the edges.

Load the stack of paper in the sheet feeder with the printable side up

and the right edge of the paper resting against the right edge guide.

Then slide the left edge guide against the left edge of the paper.

printable

side up

Note:

Always load paper into the sheet feeder short edge first.

Make sure that the paper stack fits under the arrow mark on the inside of

the edge guide.

output tray