Epson Stylus Color 900 Start hier Handleiding - Pagina 10

Blader online of download pdf Start hier Handleiding voor {categorie_naam} Epson Stylus Color 900. Epson Stylus Color 900 12 pagina's. For windows and macintosh
Ook voor Epson Stylus Color 900: Specificaties (2 pagina's), Product ondersteunings bulletin (6 pagina's), Product ondersteunings bulletin (1 pagina's), Handleiding productinformatie (13 pagina's), Productinformatieblad (4 pagina's), Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (2 pagina's), Product ondersteunings bulletin (4 pagina's), Product ondersteunings bulletin (7 pagina's), Gebruikershandleiding (40 pagina's), Online handleiding (12 pagina's)

Pagina afdrukken

Epson Stylus Color 900 Start hier Handleiding

9. After you restart your Macintosh, you need to select

your printer in the Chooser. Open the Chooser. If

you're connected to the Macintosh printer port or to

a PowerBook with one port, turn off AppleTalk

10. Click the

port you're using. Turn on background printing, if

you want to use it. Then close the Chooser.

11. Continue with section 3, "Print an image" on the

back of this card.

Install Your Bonus Software and

Electronic Manual

Once you've restarted your system, you can install the rest

of the software on your CD-ROM. (This section does not

apply to Windows 3.1 or Macintosh.)

1. Make sure the printer software CD-ROM is in your

drive.

Start

2. Click

is your CD-ROM drive letter). Then click

3. After a moment, you see the Installer Main Menu. To

install the Guided Printing Exercise/Bonus Software

or your electronic manual, just click the button for

your selection. Then follow the on-screen

instructions. Click

To view your electronic manual, you must install

Adobe Acrobat

don't already have it. The installer automatically

installs it for you. Once you've viewed the

manual, you can copy it to your hard disk using

the Copy Printer Manual to Hard Drive option.

4. After you finish installing software, you're ready to

print a color image! If the installer prompts you to

restart, go ahead and restart your system. Then see

section 3, "Print an image" , to get started.

If you want to verify your USB software

installation, see "Troubleshooting" in your

Printer Basics book.

SC 900

icon, then click the icon for the

Run

, select

EXIT

Reader on your system, if you

, and type

D:\EPSON

when you're done.

(where