Epson Stylus Color 900 Gebruikershandleiding - Pagina 18

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson Stylus Color 900. Epson Stylus Color 900 40 pagina's. For windows and macintosh
Ook voor Epson Stylus Color 900: Specificaties (2 pagina's), Start hier Handleiding (12 pagina's), Product ondersteunings bulletin (6 pagina's), Product ondersteunings bulletin (1 pagina's), Handleiding productinformatie (13 pagina's), Productinformatieblad (4 pagina's), Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (2 pagina's), Product ondersteunings bulletin (4 pagina's), Product ondersteunings bulletin (7 pagina's), Online handleiding (12 pagina's)

One of the ink out lights is flashing or on

If the B black or A color ink out light is flashing, ink is low.

Prepare a replacement cartridge.

If the B black or A color light is on, ink is out. Replace the

corresponding cartridge. See "Replacing Ink Cartridges" in your

Setup & Daily Use manual.

Ink out lights are on and the other lights are flashing

Follow these steps.

1. Remove any paper in the printer.

2. Turn the printer off. Check for and remove any foreign objects

or pieces of paper from inside the printer. Also, make sure

that there is sufficient space around the vent on the back of

the printer allowing for proper ventilation. Remove any

objects blocking the vent. Then turn the printer back on.

3. If the error is not cleared, contact your dealer.

Paper doesn't feed correctly

If any of the following problems have occurred, see the solutions

below.

Paper doesn't feed

Remove the stack of paper and check that:

The paper isn't curled or creased.

The paper isn't too old. See the instructions that came with the

paper for more information.

The paper isn't loaded above the arrow on the left edge guide.

The paper isn't jammed inside. If it is, remove the jammed paper.