Epson Stylus Color C80 Installatiehandleiding - Pagina 2

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Epson Stylus Color C80. Epson Stylus Color C80 6 pagina's. Color ink jet printer
Ook voor Epson Stylus Color C80: Specificatieblad (1 pagina's), Instructie (2 pagina's), Product ondersteunings bulletin (6 pagina's), Product ondersteunings bulletin (1 pagina's), Lees deze eerste handleiding (12 pagina's), Software-installatiehandleiding (1 pagina's), Aanvullende handleiding (1 pagina's), Gebruikershandleiding (27 pagina's), Compatibiliteitshandleiding (1 pagina's), Installatiehandleiding (1 pagina's), Productinformatie (12 pagina's), Start Here (2 pagina's), Specificaties (2 pagina's), Specificaties (2 pagina's), Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (2 pagina's), Product ondersteunings bulletin (4 pagina's), Product ondersteunings bulletin (4 pagina's), Product ondersteunings bulletin (7 pagina's), Setup (2 pagina's)

1. Check printer status to see whether it is normal or not, and check its

mechanics for smooth and any damage.

2 Enter nozzle test option (2-1), print nozzle test sheet to see whether nozzle is

normal (2-2

3. If printer is alright, please print a picture to see the result.

Ill. Installation Procedures

1. Remove ink from the air balance tube

Place the system on the table, check if there is any ink in each of the air balance

tube. If yes, you need to remove the ink in the balance tubes by the following steps:

1) Pull out the sealed plug of the balance tube (3-1-1).

2) Use the injector to draw all ink out.

3) Put the sealed plug back.

4) Put the sealed plug back.

4) Pull refill plug out.

5) Inject ink to the ink tanks according to their color.

6) Put refill plug back.

7) Check all the plugs to make sure they are completely sealed.

2. Replace the air balance plugs

INSTALLATION MANUAL ON CISS FOR PRINTER EPSON C82/C80/C70

2-3).

Pic. 2-1

Pic. 3-1-1

Pic. 2-2, 2-3

Pic.3-1-2