Epson Stylus Color C80 Productinformatie - Pagina 9

Blader online of download pdf Productinformatie voor {categorie_naam} Epson Stylus Color C80. Epson Stylus Color C80 12 pagina's. Color ink jet printer
Ook voor Epson Stylus Color C80: Specificatieblad (1 pagina's), Installatiehandleiding (6 pagina's), Instructie (2 pagina's), Product ondersteunings bulletin (6 pagina's), Product ondersteunings bulletin (1 pagina's), Lees deze eerste handleiding (12 pagina's), Software-installatiehandleiding (1 pagina's), Aanvullende handleiding (1 pagina's), Gebruikershandleiding (27 pagina's), Compatibiliteitshandleiding (1 pagina's), Installatiehandleiding (1 pagina's), Start Here (2 pagina's), Specificaties (2 pagina's), Specificaties (2 pagina's), Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (2 pagina's), Product ondersteunings bulletin (4 pagina's), Product ondersteunings bulletin (4 pagina's), Product ondersteunings bulletin (7 pagina's), Setup (2 pagina's)

Pagina afdrukken

Epson Stylus Color C80 Productinformatie

Testing the Printer

You can run a printer check to determine whether a problem

comes from the printer itself or some other source.

1. Make sure both the printer and computer are turned off.

Then disconnect the interface cable from the printer.

2. Make sure letter-size or larger plain paper is loaded in the

printer.

3. Hold down the m paper button, then press and release the

Ppower button. Continue holding down the m paper

button until the P power light starts to flash, then release

it.

The printer prints one page showing its ROM version

number, ink counter, and a nozzle check pattern. (If the

pattern has white lines, you need to clean the print head; see

below.)

4. Turn off the printer after it prints the check page. Then

reconnect the cable and turn on your printer and computer.

If the check page prints, the problem probably lies in your

software settings, interface cable, or computer. Your software

may not be installed correctly.

If the check page doesn't print, you may have a problem with

your printer. Try the suggestions in the Printer Basics book. If

nothing works, contact your dealer or EPSON.

Cleaning the Print Head

If your printouts are unexpectedly light or faint, or dots or

lines are missing from the image, you may need to clean the

print head. This unclogs the nozzles so they can deliver ink

properly. Print head cleaning uses ink, so clean it only if

quality declines.

This section explains how to clean the print head using the

Head Cleaning utility. This is the recommended method

when the printer is connected directly to your computer (not

over a network).

You can also clean the print head using the printer's control

panel. See the electronic Reference Guide for detailed

instructions.

When you don't turn on your printer for a long time, the

print quality can decline. It's a good idea to turn on your

printer at least once a month to maintain good print

quality.

If your paper comes with a cleaning sheet, don't use it

with your printer; it may jam inside the printer.

1. Make sure the printer is turned on but not printing.

The P power light should be on, but not flashing. Neither

of the other lights should be flashing or on.

You can't clean the print head if the

is flashing or on. Replace the appropriate ink

cartridge instead.

2. Load letter-size paper.

3. If you have an application running, access the printer

settings dialog box.

Or, with Windows, click

select

. Right-click your

Printers

printer icon in the Printers window. Then select

Series

(

Properties

Document Defaults

Printing Preferences

4. Windows: Click the

Macintosh: Click the

5. On the Utility menu, click the

6. Follow the instructions on the screen to clean the print

head. Cleaning takes about 30 seconds, during which the

printer makes some noise and the Ppower light flashes.

Never turn off the printer while the Ppower light is

flashing, unless the printer hasn't moved or made

noise for more than 5 minutes.

7. When the Ppower light stops flashing, run a nozzle check

to confirm that the print head nozzles are clean.

Make sure paper is loaded in the printer and click

nozzle check pattern

(Macintosh). Then click

prints (see below for details).

8. If the nozzle check pattern has no gaps in its lines, click

Finish

If the pattern has any gaps, click

head again. If you don't see any improvement after cleaning

three or four times, see the troubleshooting section in the

online Reference Guide.

1/02

EPSON Stylus C80

ink out light

, point to

Start

Settings

EPSON Stylus C80

in Windows NT,

in Windows 2000).

tab.

Utility

Utility button.

Head Cleaning

(Windows) or

Confirmation

. The nozzle check pattern

to clean the print

Clean

EPSON Stylus C80

, then

button.