Epson Stylus Photo 1270 Installatiehandleiding - Pagina 5

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Epson Stylus Photo 1270. Epson Stylus Photo 1270 17 pagina's. Product support bulletin(s)
Ook voor Epson Stylus Photo 1270: Product ondersteunings bulletin (6 pagina's), Product ondersteunings bulletin (1 pagina's), Productinformatieblad (4 pagina's), Specificaties (2 pagina's), Productinformatie (11 pagina's), Aanvullende handleiding (2 pagina's), Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (2 pagina's), Product ondersteunings bulletin (4 pagina's), Product ondersteunings bulletin (7 pagina's)

Epson Stylus Photo 1270 Installatiehandleiding
2.
Turn on your computer and start Windows. If the New Hardware
Found screen or any other Wizard appears, click Cancel.
3.
Insert the printer software CD shipped with your printer in the CD-
ROM drive. The Installer dialog box appears. (For floppy disk users,
insert the disk in a disk drive and double-click the My Computer icon,
then the floppy disk drive icon, and then Setup.exe.)
4.
Double-click Install Printer Driver/Utility, then click OK in the dialog box
that appears to start the printer software installation
.
5.
Follow the on-screen instructions to turn on your printer.
For Windows 98 users, the printer port configuration starts
automatically.
For printers connected via USB cable, the USB device driver installation
starts automatically at this point.
6.
After turning on the printer, the Setup utility opens automatically.
Follow the on-screen instructions to install the ink cartridges, check the print
head nozzles, and clean the print head. When a message appears informing
you that the setup is complete, click OK.
Note:
If the Setup utility does not start, go to step
the printer's control panel.
Copyright© 1999 by SEIKO EPSON CORPORATION,
Nagano, Japan.
to install the ink cartridge using
Printed in Japan.xx-xx