Epson Stylus PHOTO 870 Installatie-instructie - Pagina 5

Blader online of download pdf Installatie-instructie voor {categorie_naam} Epson Stylus PHOTO 870. Epson Stylus PHOTO 870 9 pagina's. Product support bulletin(s)
Ook voor Epson Stylus PHOTO 870: Montage-instructies (5 pagina's), Cartridges vervangen (2 pagina's), Product ondersteunings bulletin (6 pagina's), Product ondersteunings bulletin (1 pagina's), Aanvullende handleiding (2 pagina's), Specificaties (2 pagina's), Productinformatie (11 pagina's), Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (2 pagina's), Product ondersteunings bulletin (4 pagina's), Product ondersteunings bulletin (7 pagina's)

Stopping

2) Roll up the Plastic Valve.

5. Firstly use a needle to poke the film of the cartridge (Picture A); Then insert the vacuum

pump into the holes of Cartridge as the below picture shown and pull the plunger

backward (Picture B); Stop pulling the plunger till ink flows into the vacuum pump;

(Picture A)

6. Measure 13cm from the edge of the printer and make a mark: then tear off the sticker

(Picture A) and attach Support Arm to the printer as the Picture B shows.

Working

(Picture B)