Dillon FI-80 LCD Gebruikershandleiding - Pagina 12
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dillon FI-80 LCD. Dillon FI-80 LCD 19 pagina's.
Pagina afdrukken
A11
Enables "Peak Hold" mode. The display will only increment upward
and the peak reading is retained. Press PEAK key to enter and exit
(LCD version)
the mode once active.
Peak-Hold
Mode
Note: UNITS are locked in default when A11 is enabled.
A12
Enables hardware handshaking for Print Ticket Mode. Valid only
when A6 is set to "1".
(LCD version)
Handshaking
"0" = Disable Handshaking
A13
Not presently used. Keep parameter on 0.
(LCD version)
USER MENU PROCEDURES
This section provides instructions for some parameters.
ID Number Entry (A8)
1.
Scroll to "A 8" and press the
2.
The display will momentarily show "ID NO", followed by a value with one flashing
digit. This value will be the current ID number value.
3.
Use the four directional keys to adjust the displayed value to the actual ID Number
value. Increase and decrease the flashing digit by pressing
the flashing digit by pressing the ZERO key. The
position of the flashing digit.
4.
After entering the exact value, press the Set key to save the ID Number value. The
display will show "SET" momentarily and revert back to A8.
LF (Line Feeds) Number Entry (A9)
1.
Scroll to "A 9" and press the
2.
The display will momentarily show "LF", followed by the current line feeds value.
3.
Use the four directional keys to adjust the displayed value to the actual ID Number
value. Increase and decrease the flashing digit by pressing
the flashing digit by pressing the ZERO key. The
position of the flashing digit.
4.
After setting the exact value, press the Set key to save the line feeds value. The
display will show "SET" momentarily and revert back to A9.
"0" = Peak Hold disabled, "3" = Peak Hold enabled
"1" = Enable Handshaking
key.
key.
0√
3
0√
1
0√
1
or
. Decrease
and
keys will change the
or
. Decrease
and
keys will change the