AEMC instruments CA7027 Gebruikershandleiding - Pagina 10
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEMC instruments CA7027. AEMC instruments CA7027 20 pagina's. Fault mapper pro graphical tdr
Ook voor AEMC instruments CA7027: Gebruikershandleiding (20 pagina's)
Pagina afdrukken
4.1
The Fault Mapper Pro
travel to the far end of the cable under test, or to an intermediate fault and
return. The velocity at which the signal travels Vp (Velocity of Propagation)
will depend on the characteristics of the cable.
Based on the selected Vp and the measured travel time of the test pulse,
the Fault Mapper Pro
their distances along the cable.
4.2
The Fault Mapper Pro
an accuracy of ±1%. This measurement accuracy is based upon the cor-
rect value of Vp being used for the cable under test, and homogeneity of
the Vp along the cable length.
If the Vp is set incorrectly by the operator, or the Vp varies along the length
of the cable, then additional errors will be incurred and the measurement
accuracy will be affected.
See § 4.8 for setting the Vp.
Correct measurement of fault distances is also dependent on the cursor being
positioned accurately by the operator. When locating faults with the Fault
Mapper Pro
the cable waveform as shown below.
8
Find Quality Products Online at:
All manuals and user guides at all-guides.com
Principles of Operation
works by measuring the time taken for a signal to
®
calculates and displays impedance anomalies and
®
Accuracy and Velocity of Propagation (Vp)
measures distances to faults and cable lengths to
®
NOTE: The Vp is less well defined with unshielded multi-conductor cable,
including power cable, and is lower when a cable is tightly wound on a drum
than when it is installed in a linear fashion.
the cursor should be positioned at the beginning of the feature on
®
Vp=72% Z=100Ω
621ft
GlobalTestSupply
www.
CHAPTER 4
OPERATION
Fault Mapper Pro
Model CA7027
®
.com