Dillon Precision Products RL 550B Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Dillon Precision Products RL 550B. Dillon Precision Products RL 550B 18 pagina's.

Pagina afdrukken

Introduction

First of all, the Dillon RL 550B is a remarkably simple

machine–a little care and thought while setting up will

save you time and give you thousands of trouble free

rounds.

Suggested Minimum Equipment:

1) Loading Manual

3) Safety Glasses

5) Dial Caliper *

(* Indicates items that are not

absolutely essential, but are pretty darned handy!)

Mounting the RL 550B to your bench.

Place your RL 550B on the edge of sturdy bench or table.

Give yourself about 12 inches of work space on each side of

the machine to allow room for components.

Fig. 1 - Using the machine as a template, mark and drill

four 1/4 inch holes allowing 12 inches on each side for

your work area.

Fig. 2 - This photograph shows the correct mounting

position of the cartridge collection bin bracket in relation

to the machine.

2) Powder Scale

4) Primer Flip Tray *

Fig. 3 - The cartridge collection bin (#13839) simply slides

onto the bracket and will be in the proper position.

Using the machine itself as a template, mark and drill

four one-quarter inch holes in your bench and bolt your RL

550B securely to it, Fig. 1. Next, mount the cartridge

collection bin bracket (#13803) onto your bench, Fig. 2,

allowing approximately one-eighth inch clearance between

the platform (#13781) and the ejected cartridge chute.

Using two screws or bolts, secure the bracket to your

bench. The cartridge collection bin (#13839) simply slides

on the bracket, Fig. 3, and will be in the proper position to

catch ejected loaded rounds. Bolt the operating handle in

place as shown in the schematic.

Safety Points to Know Before you Begin

Reloading ammunition involves the use of highly

explosive primers and powder. Handling these materials is

inherently dangerous. You should recognize this danger

and take certain minimum precautions to lessen your

exposure to injury.

Never operate the machine without ear and eye

protection on. Call our customer service department at

(800) 223-4570 for information on the wide variety of

shooting/safety glasses and hearing protection that Dillon

has to offer.

• PAY ATTENTION: Load only when you can give your

complete attention to the loading process. Don't watch

television or try to carry on a conversation and load at the

same time. Watch the automatic systems operate and make

sure they are functioning properly. If you are interrupted

or must leave and come back to your loading, always

inspect the cases at every station to insure that the proper

operations have been accomplished.

• SMOKING: Do not smoke while reloading or allow

anyone else to smoke in your reloading area. Do not allow

open flames in reloading area.

• SAFETY DEVICES: Do not remove any safety devices

from your machine or modify your machine in any way.

• LEAD WARNING: Be sure to have proper ventilation

while handling lead components or when shooting lead

bullets. Lead is known to cause birth defects, other

reproductive harm and cancer. Wash your hands

thoroughly after handling anything made of lead.

* Indicates a caliber specific part. See the caliber conversion

chart on page 16 for the caliber you are loading for.