Epson TM-L90 series Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson TM-L90 series. Epson TM-L90 series 40 pagina's. Attaching cover on the power switch
Ook voor Epson TM-L90 series: Brochure (1 pagina's), Brochure (2 pagina's), Producthandleiding (27 pagina's), Specificaties (2 pagina's), Specificaties (8 pagina's), Informatie handleiding (5 pagina's), Specificaties (4 pagina's), Gebruikershandleiding (17 pagina's), Gebruikershandleiding (21 pagina's), Gebruikershandleiding (21 pagina's), Handleiding productie (22 pagina's), Start Here (2 pagina's), Start Here (2 pagina's), Handmatig (13 pagina's), Gebruiksaanwijzing (12 pagina's), Gebruikershandleiding (36 pagina's), Ontwikkelingshandboek (34 pagina's), Handmatig (2 pagina's)

Installing Horizontally or Vertically

You can install the printer horizontally (with the paper exit on top) or

vertically (with the paper exit at the front) either on a flat surface or by

hanging it on a wall (using the optional hanging bracket set, WH-10).

Both the horizontal and vertical positions are shown below.

When you install the printer horizontally, attach the control panel

label and position the roll paper near end sensor as shown in the

illustrations. To move the sensor, follow these steps.

Loosen the screw with a coin or similar tool

and turn it at least 3 or 4 times.

Push the lever gently as far as it will go.

Turn the tab (in the direction of the arrow in

the illustration) while pushing the lever until it

clicks into place in hole A.

Secure the screw and make sure the lever moves smoothly.

Note:

To hang the printer on the wall, see

the Wall Hanging Bracket Set

Installation Manual provided with the

WH-10 for instructions.

tab

screw

TM-L90 User's Manual 5

English