Epson TM-L90 series Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson TM-L90 series. Epson TM-L90 series 17 pagina's. Attaching cover on the power switch
Ook voor Epson TM-L90 series: Brochure (1 pagina's), Brochure (2 pagina's), Producthandleiding (27 pagina's), Specificaties (2 pagina's), Specificaties (8 pagina's), Informatie handleiding (5 pagina's), Specificaties (4 pagina's), Gebruikershandleiding (40 pagina's), Gebruikershandleiding (21 pagina's), Gebruikershandleiding (21 pagina's), Handleiding productie (22 pagina's), Start Here (2 pagina's), Start Here (2 pagina's), Handmatig (13 pagina's), Gebruiksaanwijzing (12 pagina's), Gebruikershandleiding (36 pagina's), Ontwikkelingshandboek (34 pagina's), Handmatig (2 pagina's)

When using the label continuous issuing mode (not using the peeler), close

the peeler cover now. When using the peeler (the label peeler issuing mode),

pass the paper through the peeler, and close the peeler cover.

label peeler issuing mode

Press the PAPER FEED button. The paper is automatically fed backward, and

PAPER OUT

the

Note:

If you open the roll paper cover with roll

paper installed, make sure to open the

peeler cover first, and then the roll paper

cover. If you open them in the reverse

order, the roll paper can get trapped under

the roll paper cover when it is closed,

causing a possible paper jam. When

closing the roll paper cover, make sure to

close it firmly, pressing both ends.

While a label is being issued, do not touch

it until the PAPER OUT LED starts

flashing. Pulling it before that may result

in the waste of a label.

Do not block the label peeler detector with your fingers, or anything else while the label

issuing is in progress. This may cause the printer to feed the following label.

LED goes off.

label continuous issuing mode

TM-L90 with Peeler User's Manual 7

English