Epson TM-L90 series Gebruikershandleiding - Pagina 19

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson TM-L90 series. Epson TM-L90 series 21 pagina's. Attaching cover on the power switch
Ook voor Epson TM-L90 series: Brochure (1 pagina's), Brochure (2 pagina's), Producthandleiding (27 pagina's), Specificaties (2 pagina's), Specificaties (8 pagina's), Informatie handleiding (5 pagina's), Specificaties (4 pagina's), Gebruikershandleiding (40 pagina's), Gebruikershandleiding (17 pagina's), Gebruikershandleiding (21 pagina's), Handleiding productie (22 pagina's), Start Here (2 pagina's), Start Here (2 pagina's), Handmatig (13 pagina's), Gebruiksaanwijzing (12 pagina's), Gebruikershandleiding (36 pagina's), Ontwikkelingshandboek (34 pagina's), Handmatig (2 pagina's)

Troubleshooting

ERROR LED is on or flashing

❏

Make sure that the roll paper cover is closed and the PAPER OUT LED is not on.

Close the cover or replace the paper if necessary.

❏

If the printer has been printing a lot and the print head gets too hot, the ERROR LED

starts flashing, and printing stops. When its temperature cools down to the normal

range, printing resumes automatically.

❏

Turn off the printer and then turn it back on. If the LED is still flashing, consult with

your supervisor or a service person.

PAPER OUT LED is flashing

If the PAPER OUT LED continues to flash even after the issued label is removed, the label

peeler detector may be detecting something. Press the PAPER FEED button once.

Paper jam

Turn off the power, open the peeler cover, and then open the roll paper cover to check for

a paper jam. If there is a paper jam, remove the jammed paper and follow the instructions

in the Installing Roll Paper section to prepare the printer for printing.

English

TM-L90 User's Manual 19