Epson TM-L90 series Handmatig - Pagina 2

Blader online of download pdf Handmatig voor {categorie_naam} Epson TM-L90 series. Epson TM-L90 series 13 pagina's. Attaching cover on the power switch
Ook voor Epson TM-L90 series: Brochure (1 pagina's), Brochure (2 pagina's), Producthandleiding (27 pagina's), Specificaties (2 pagina's), Specificaties (8 pagina's), Informatie handleiding (5 pagina's), Specificaties (4 pagina's), Gebruikershandleiding (40 pagina's), Gebruikershandleiding (17 pagina's), Gebruikershandleiding (21 pagina's), Gebruikershandleiding (21 pagina's), Handleiding productie (22 pagina's), Start Here (2 pagina's), Start Here (2 pagina's), Gebruiksaanwijzing (12 pagina's), Gebruikershandleiding (36 pagina's), Ontwikkelingshandboek (34 pagina's), Handmatig (2 pagina's)

How to connect an Epson POS printer with Ethernet Interface

Type III

Type IV

Click to select

Type IV

Installation Steps for Installing Ethernet Adapter

The Type IV module (UB-E02 or similar) is the latest type of Connect-It Ethernet adapter. The module can be set by

accessing it directly using a web browser or by a configuration utility. This type of module can also act as a device type

Print server to be used by more than 1 computer.

Installing and Setting the Connect-It Ethernet Adapter

Install the Connect-It Ethernet adapter into the Epson TM series printer

The Type IV adapter can replace the existing adapter and is held in place by 2 screws.

If changing a printer to Ethernet you must change the specific dip switch on the Epson printer to allow for the Ethernet

card.

http://www.beaglehardware.com/howtoethernet.html[3/4/2011 12:27:20 PM]

(Type

IV)

(Type IV)