Epson TM-L90 series Ontwikkelingshandboek - Pagina 6

Blader online of download pdf Ontwikkelingshandboek voor {categorie_naam} Epson TM-L90 series. Epson TM-L90 series 34 pagina's. Attaching cover on the power switch
Ook voor Epson TM-L90 series: Brochure (1 pagina's), Brochure (2 pagina's), Producthandleiding (27 pagina's), Specificaties (2 pagina's), Specificaties (8 pagina's), Informatie handleiding (5 pagina's), Specificaties (4 pagina's), Gebruikershandleiding (40 pagina's), Gebruikershandleiding (17 pagina's), Gebruikershandleiding (21 pagina's), Gebruikershandleiding (21 pagina's), Handleiding productie (22 pagina's), Start Here (2 pagina's), Start Here (2 pagina's), Handmatig (13 pagina's), Gebruiksaanwijzing (12 pagina's), Gebruikershandleiding (36 pagina's), Handmatig (2 pagina's)

Section 2. Details on Settings

This section describes connection configurations and how to make the settings for the

TM-L90 printers.

Refer to the release notes (Relnote.txt).

Confirm that the following settings have been made correctly.

1) Serial port

DIP-SW1

No.

Setting

OFF

Set DIP-SW1-1 (Power button function).

If this DIP Switch is ON, the power button is disabled.

Set DIP-SW1-2 (Interface condition selection).

If this DIP Switch is ON, communications settings are set via DIP Switches. If the

DIP Switch is OFF, Memory Switches are used.

Set DIP-SW1-3 (Handshake) to DTR/DSR.

Set DIP-SW1-4 (Bit length) to 8 bits.

Set DIP-SW1-5 to DIP-SW1-8 accordance with the port information.

The described set values are the default values. For the details, refer to the

product manual of the POSPrinter. Also, if these settings are changed, make sure

to change the port information using the SetupPOS utility.

Settable

Fixed at OFF

Settable

APPLICATION DEVELOPMENT GUIDE

POSPrinter (TM-L90)

Version 3.00 Feb. 2019