Epson UB-P500 Gebruikershandleiding

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson UB-P500. Epson UB-P500 4 pagina's.

Introduction

The UB-P500 is a dedicated interface board for Epson EU-T482 series.

This manual provides instructions, including a simple setup for operators to

use the interface board safely and correctly.

Important Safety Information

Key to Symbols

The symbols in this manual are identified by their level of importance, as

defined below. Read the following carefully before handling the product.

CAUTION:

Cautions must be observed to avoid minor injury to yourself, damage to

your equipment, or loss of data.

Note:

Notes have important information and useful tips on the operation of your equipment.

Safety Precautions

CAUTION:

Do not install the UB-P500 into other printers than the Epson EU-T482

series.

The printers may not work properly.

Be sure to make the printer setting appropriately for each interface.

Disconnect the power supply from the printer before you remove the

interface board. The electrical current is flowing in some parts of the

printer circuit even when the power switch is turned off. The interface

board and printer may become damaged if you install the interface

board with the power supply connected to the printer.

Wear a grounded wrist strap when handling the interface board to

prevent damage from static electricity.

To avoid contamination, do not touch the board connector.

Unpacking

The following items are included. If any item is damaged, contact your dealer.

❏

UB-P500

❏

User's Manual (this manual)

User's Manual

Printed in China