Epson Endeavor 486C Product ondersteunings bulletin - Pagina 17
Blader online of download pdf Product ondersteunings bulletin voor {categorie_naam} Epson Endeavor 486C. Epson Endeavor 486C 21 pagina's. Product information guide
Ook voor Epson Endeavor 486C: Handleiding productinformatie (9 pagina's)
Pagina afdrukken
MEMORY
Q13. What is the standard memory configuration and maximum amount of
system memory that can be used in the Epson Endeavor 486C
computer?
A.
The Epson Endeavor 486C series computers come standard with 4MB of
system memory. This memory is soldered on the main system board.
There are two SIMM sockets on the main system board. These sockets
accept 1 MB, 4MB or 16MB SIMMs. Optional SlMMs may be purchased to
increase the computer's memory up to a maximum of 36MB.
NOTE: The SlMMs used must be 70ns or faster, 32 or 36-bit, 72-pin, fast
page mode type.
Q14. What are the valid system memory configurations for the Epson
Endeavor 486C computer?
A.
The following table shows the possible SIMM configurations for the Epson
Endeavor 486C series computers; do not install memory in any other
configuration.
*
Standard memory on the system board
**
SIMMS can occupy either socket
PSB No: S-0164
Page: 7 of 10