Motorola BLINK1 Gebruikershandleiding - Pagina 18

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Motorola BLINK1. Motorola BLINK1 25 pagina's. Wi-fi
Ook voor Motorola BLINK1: Gebruikershandleiding (26 pagina's), Gebruikershandleiding (23 pagina's), Gebruikershandleiding (46 pagina's)

Pagina afdrukken

Connectivity

My Phone application

Issues

displays the following

message:

"Unable to connect to

BMS server".

Setting Up

While I am adding

a new camera to

my account, I am

not able to find any

cameras to add.

General

What are the

supported browsers

for accessing from

my PC/Mac

Connectivity

I am having problems

Issues

to access the camera

from remote PC or

from my 3G phone.

BLINK1_UK_V3_2013_02_28.indd 34-35

1. Check the Wi-Fi network

strength.

2. Check if you are connected

to internet by starting the

phone browser and going to a

website like www.google.com.

3. Try again if you are successful

connecting to internet.

If you are trying to add a

camera which has previously

been added into your account

/ another account, you will first

have to reset the camera. This

can be done by pressing and

holding the RESET button at

the bottom of the camera for 6

seconds.

On PC and Mac

, we

recommend to use Google

Chrome. However the following

browsers are also supported:

PC: Internet Explorer 8 and

above. Mac

: Safari.

Please check your home Wi-Fi

router settings and enable

UPNP on your router for better

performance to stream to a

remote device.

If you have multiple Wi-Fi

routers at your home, please

configure your camera to con-

nect to the router which has the

Broadband / line connection.

Help

General

What is the

significance of LED

blinking?

Connectivity

I am not able to

Issues

access my camera.

Setting Up

During setup on de-

vice for Android

™

and

iOS, during the last

step I am not able to

find my camera and

the setup fails.

Help

A blinking LED indicates the fol-

lowing status:

Fast blinking: Your camera is in

setup mode. You can add the

camera to your account in this

mode. Out of the box, the cam-

era is in setup mode. To reset to

setup mode, press and hold the

RESET button on the bottom of

the camera untill you hear a long

beep.

Slow blinking: The camera is

either connecting to the router or

lost the link to the router. Please

ensure that the camera is in the

Wi-Fi signal range.

LED is stable: The camera is

connected to the Wi-Fi network.

Please check if the camera is

within Wi-Fi range. If the LED

on your camera is slow blinking,

please try to move the camera

closer to the router for better Wi-

Fi range and try again.

Please reset the camera to

setup mode and try again. Press

and hold the RESET button on

the bottom of the camera untill

you hear a long beep. Wait for a

minute for the camera to restart.

The camera LED is blinking

fast, indicating that it is in setup

mode. Now restart the setup

from your Smartphone again.

28/2/13 2:07 PM