Motorola MBP31 Triple Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Motorola MBP31 Triple. Motorola MBP31 Triple 32 pagina's.
Pagina afdrukken
2.4
Registration
The baby monitors are already pre-registered upon your purchase. You
do not need to register one again unless a Camera unit loses its link
with the parent unit, or you want to register an additional Camera unit.
Up to 4 Camera units can be registered to one parent unit. If you have
more than one Camera unit, please check that you have selected the
correct channel at the Parent unit for that Camera unit before you
attempt to register it again.
To re-register your Camera unit, or register a new Camera unit, follow
the procedure below:
1.
Switch off the Camera unit and remove the small power plug from
the Camera unit.
2.
On the Parent unit, press
(
3.
Press
or
+
4.
Press
or
4
) that you want the Camera unit to pair with.
5.
Press
pairing process.
6.
Switch on the Camera unit.
Wait 16 seconds for the parent unit to locate the Camera unit and pair
it to the selected channel. A
if the registration is successful.
If no Camera unit is found, a
Switch the Camera unit off and on and repeat the registration
procedure.
Getting started
)
until
is selected on the LCD screen.
-
to select the camera channel (
to start registration.
to enter menu mode.
is displayed during the
will be displayed on the LCD screen
will be displayed on the LCD screen.
1
2
3
/
/
/
11