Motorola MBP433 Gebruikershandleiding - Pagina 15
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Motorola MBP433. Motorola MBP433 27 pagina's. Digital video baby monitor
Ook voor Motorola MBP433: Gebruikershandleiding (27 pagina's), Snelstarthandleiding (2 pagina's), Gebruikershandleiding (29 pagina's)
Pagina afdrukken
4.6.3 Delete a camera
M
1. Press the
<
2. Press the
and the
+
3. Press the
the OK button to confirm.
C
C
4.
1 /
2 /
button to select the desired CAM, and press the OK button to select.
+
5. Press the
button to delete that registration.
4.6.4 Scan the cameras
M
1. Press the
<
2. Press the
and the
+
3. Press the
the OK button to confirm.
4. The screen will then display images from each registered camera in
a loop, changing about every 12 seconds.
TIP
Press OK repeatedly for a quick way to go to
menu.
NOTE
If the parent unit is in scan mode and one of the registered cameras
is turned off or out of range, the scan will stop at the missing camera
(e.g. camera 1) and display
5 seconds.
WARNING
Check the camera and correct the fault immediately if you are using that
camera to monitor your baby.
If you want to continue in camera scan mode without that camera, delete
the camera (see 4.6.3 Delete a camera) and start the scan again.
4.7
Temperature
M
1. Press the
<
2. Press the
+
3. Press the
Parent Unit Menu Options
Menu button and the menu bar will pop up.
LEFT button or
+
/
/
/
menu will pop up.
-
UP button or
C
C
3 /
4 will pop up, press the
-
UP or
DOWN button to select X, and press the OK
Menu button and the menu bar will pop up.
LEFT button or
+
/
/
/
menu will pop up.
-
UP button or
C
Menu button and the menu bar will pop up.
LEFT button or
-
UP button or
>
RIGHT button until
DOWN button to select
+
>
RIGHT button until
DOWN button to select
while emitting a warning beep every
3
>
RIGHT button until
DOWN button to select °C or °F.
C
is highlighted,
, and press
-
UP button or
C
is highlighted,
, and press
mode without using the
t
is highlighted.
DOWN
15