Motorola VM36XL Gebruikershandleiding - Pagina 20
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Motorola VM36XL. Motorola VM36XL 29 pagina's. 5.0" hd video baby monitor with touch screen
Ook voor Motorola VM36XL: Snelstarthandleiding (2 pagina's), Gebruikershandleiding (32 pagina's)
Pagina afdrukken
4.3.5
Add a camera to your account
1.
Log in to the APP.
2. Tap Devices, and then tap
3. Tap (your baby monitor model's name) to add the new camera.
4. Select and enter the password of your Wi-Fi® network and then tap Next.
5. Power on the camera.
6. Press and hold
red.
7. Tap
Continue
on your device when you hear the voice prompt
pairing'.
8. Tap
Generate QR code
in front of the camera to get scanned till you will hear a confirmation
message
'Pairing
Complete
9. Tap
when it is successfully connected. It may take a few minutes
for the camera to connect to the Wi-Fi® network.
10. If connection fails, tap
4.4
Reset the camera
You will need to reset your camera if you relocate your camera from one router
to another.
1.
Press and hold
voice prompt
2. Follow the section 4.3.5 to add the camera again.
20
on the device screen to add a new camera.
PAIR
at the bottom of the camera. The LED flashes blue and
on your device and hold the QR code 15 cm to 30 cm
success' from your device.
Retry
and repeat steps 1 - 10 in this section.
PAIR
for about 20 seconds. Release it when you hear the
'Reset
camera'. The camera is reset successfully.
Viewing the baby through your device
'Ready for