Motorola D212 Gebruikershandleiding - Pagina 16

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Motorola D212. Motorola D212 32 pagina's. Digital cordless phone
Ook voor Motorola D212: Specificatieblad (2 pagina's)

Motorola D212 Gebruikershandleiding
Allegro_CID TAD.book Page 14 Tuesday, January 15, 2008 4:30 PM
RECORD: Record your own outgoing message after the
announcement "Please speak after the tone". To stop, press
. When you are finished, press
DEFAULT: Remove any used recorded outgoing message, and
set the active message back to the default setting. Press
to confirm.

Ring delay

The ring delay is the number of rings after which your
answering machine will take an incoming call and play your
outgoing message. You can select from 2 to 9 rings or Toll
Saver mode.

Toll Saver mode (economy setting)

Toll saver can save you the cost of a call when you ring in to
access your messages remotely (see page 16 for remote
operation). If your answering machine answers after 3 rings
then you have new messages. If it answers after 7 rings then
there are no new messages. This means that you can hang up
after 3 rings knowing you have no new messages and save
yourself the cost of the call.
1. Press
to access the main menu.
2. Press
or
to select "TAM" and press
to select "TAM SETTINGS" and press
3. Press
or
to select "SET RINGS" and press
4. Press
or
to select from 2-9 rings or "TOLL SAVER" and
5. Press
or
press
.
14

Record a memo

You can use your phone to record a memo message/reminder
for another user of your phone. The memo can be up to 3
.
minutes long and can be played back with your answering
machine messages. You can only store one memo at a time.
1. Press
2. Press
3. Press
4. After the announcement "Please leave your message after
the tone", speak your message clearly into the handset
microphone. While recording memo, "RECORDING" appears.
To stop recording press
5. When you are finished, press

Play back a memo directly

1. Press
The day and time memo was recorded are announced.
2. Press
To delete the memo:
Press
deleted' is announced.
.
See 'Listening to your messages', for information on how to
.
play back answering machine messages/memos.
.

Listening to your messages

When you have new messages, the number of new messages
will flash on the base display, and "TAM" appears on the handset
display. When the message alert is on, and you have new
messages stored on your answering machine, you will hear a
tone every 60 seconds. Any new messages will be played back
to access the main menu.
or
to select "TAM" and press
or
to select "MEMO" and press
.
.
. The memo is played back over the base speaker.
to stop playback at any time.
at any time during playback, after which 'Message
.
.