aculab Prosody X Installatiehandleiding - Pagina 8

Blader online of download pdf Installatiehandleiding voor {categorie_naam} aculab Prosody X. aculab Prosody X 20 pagina's. 1u high availability chassis
Ook voor aculab Prosody X: Snelstarthandleiding (13 pagina's)

Pagina afdrukken

Prosody X Installation guide

1.2

Powering the Prosody X HA 1U on

Connect power cords to the Prosody X 1U HA chassis according to the following

procedure:

•

Check that the electrical outlet is grounded and it is within the permitted range

shown on the rating label

•

For the AC chassis, plug the power cords into the AC power IEC inlet socket on

the rear of the Prosody X 1U HA chassis

IEC inlet PSU 1

Figure 1-3 AC power inlet connectors

•

For the DC chassis, connect a suitably current rated and insulated wire pair to

each terminal pair observing the correct polarity, which is labelled as 0V and -48V

adjacent to the screw terminals

DC inlet screw

terminals PSU 1

Figure 1-4 DC power inlet terminals and polarity

•

Connect the other ends of the power cords/wire pairs into a suitable electrical

outlet and turn on the supply

•

Switch on both PSU modules at the rear

Press the "standby" ( ) button on the front panel

•

Each power module has a green LED showing that it is powered up

•

Front panel PSU Status LEDs show that both power modules are connected and

switched on

The Standby button uses the

The system may take several minutes to initialise following power on.

8 of 25

IEC inlet PSU 2

DC inlet screw

terminals PSU 2

-48V

NOTE

symbol on the front of the Prosody X 1U HA chassis.

NOTE