Argus DC1515 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Argus DC1515. Argus DC1515 18 pagina's. Argus camera user's manual digital camera dc1510

Pagina afdrukken

Taking Pictures

Resolution

The camera is defaulted to High Resolution (CIF) mode

To select low resolution (QCIF):

1. Press Mode button repeatedly until

2. Press Shutter button to confirm your selection and "80" will appear on the LCD panel, indicating

that a maximum of 80 photos can be taken with low resolution.

NOTE: After taking a few photos of low resolution, if you want to switch back to high resolution: (1)

Press Mode button until

selection and the remaining number of photos that can be taken will be shown on the LCD panel.

Selecting AC frequency

This camera is set to your country's AC mains frequency (e.g. 60Hz for US, 50Hz for Europe). If you

take photos under an electric light source in another country with a different frequency, you have to set

the frequency to match the AC mains frequency of the country you are in. Otherwise horizontal, black

stripes will be found on the taken photos due to incorrect mains frequency. There will be no problems

when taking photos under sunlight.

To change the frequency:

1. Press Mode button repeatedly until "60 (Hz)" or "50 (Hz)" is shown on the LCD panel.

2. Press Shutter button to change from "60 (Hz)" to "50 (Hz)" (or from "50 (Hz)" to "60 (Hz)" to match

that country's AC mains frequency.

For example, if the preset for your camera is 60 (Hz), you will see 50 (Hz) on the LCD panel when

you press Mode button repeatedly. To change to 50 (Hz), press Shutter button once.

Taking a photo

You may choose to hold camera as shown in Figure 1 or Figure 2 when taking photos.

1. Look through the viewfinder.

NOTE: The focus is set to work best when taking photos of an object that is at least 2 feet away

from the camera.

2. Press Shutter button.

You will hear a "beep" and the frame counter will count down 1 frame, indicating that an image has

been taken.

appears on the LCD panel (2) Press Shutter button to confirm your

Figure 1

is shown on the LCD panel.

Figure 2