Motorola PTX600 Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Motorola PTX600. Motorola PTX600 20 pagina's.

Pagina afdrukken

If the dial selector (2) is moved, but no call request is

sent, the display will be held until the tone H sounds.

The display will then revert to the IDLE STATE.

Note: When using the keypad radio, if the shortform

dial number is displayed, it may be edited as

described in the Keypad Edit section.

Dedicated Calls

Hold the Base Call Button (7) down for a

preprogrammed period to make a call to a

preprogrammed number. The number will then be

displayed and the conversation can go ahead.

Manual Dialling (Keypad Radios only)

To make a call enter the telephone number, the

identity of the radio or group of radios via the

keypad, e.g. "210" followed by

Keypad Edit (Keypad Radios only)

Any number shown in the display may be edited

before a call is initiated. Enter this mode by pressing

(10). Press

and enter the correct number. If

during a call, the call will end.

English

or PTT.

again to delete the last digit

is pressed

Outgoing Calls/Incoming Calls

Last Number Redial (Keypad Radios only)

The last number the radio dialled is stored in the

memory of the radio. For status calls only the called

number will be stored, not the status message.

Partially entered numbers are also stored.

Incoming Calls

There are two types of systems that the radio may

be used on, Off Air Call Set Up (OACSU) and Full

Off Air Set Up (FOACSU).

If you are in any doubt about which system you are

operating on, consult your dealer.

Receiving a call on an OACSU system -

When the radio is called tone D will sound and the

LED and display ﬂashes. This will then be followed

by tone B.

Receiving a call on an FOACSU system -

When the radio is called tone E will sound and the

LED and display ﬂashes.

Press either the PTT or

Tone D will sound until a trafﬁc channel is

allocated, then tone B sounds.

Note: The system may have a limited call time and

the call may be terminated automatically if this call

time is exceeded.

key to accept the call.

2-Year Warranty