Motorola XPR 4350 Installatiehandleiding - Pagina 22

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Motorola XPR 4350. Motorola XPR 4350 45 pagina's.

2-6

2.2.2

Locking Kit (Optional)

If an optional locking kit is used (shown in

trunnion before installing the radio mounting screws. Then slip the top lock housing on and remove

the key. You can install the lock on either side of the radio, and by rotating it 180°, you can also install

it on dash installations.

2.3

Route the red radio power cable from the radio to the vehicle's battery compartment, using accepted

industry methods and standards. Be sure to grommet the firewall hole to protect the cable. Remove

the 15-amp (part number 6580283E06), 20-amp (part number 6580283E07) or 30-amp (for 110W)

fuse from the fuseholder and connect the red lead of the radio power cable to the positive battery

terminal using the hardware provided as shown in

convenient solid chassis ground point. DO NOT connect the black lead directly to the battery's

negative terminal.

March 23, 2006

Figure

Standard Configurations: Power Cable

2-8), position the lock bottom housing on the

Existing

Mounting

Screw

Lock

Housing

Lock

RLN4779_ Locking Kit

MAEPF-28266-O

Figure

2-9. Connect the black lead to a

6816812H01