Motorola CP160 Gebruikershandleiding - Pagina 20

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Motorola CP160. Motorola CP160 46 pagina's. Uhf2 (438-470mhz)
Ook voor Motorola CP160: Basis gebruikershandleiding (16 pagina's), Basis gebruikershandleiding (16 pagina's), Basis gebruikershandleiding (18 pagina's), Gedetailleerde servicehandleiding (28 pagina's), Cps/Tuner Installatiehandleiding (6 pagina's), Service-informatie (46 pagina's), Service-informatie (46 pagina's)

Pagina afdrukken
Motorola CP160 Gebruikershandleiding

TURNING THE RADIO ON OR OFF

ON
Turn the On/Off/Volume
Turn the On/Off/
Control knob clockwise. If
Volume Control knob
power-up is successful,
counter-clockwise
you will hear the Self-Test
until you hear a click
Pass Tone (
)
and both the display
and see the display icons
and LED indicators
light momentarily and the
turn off.
LED flash green.
If the radio fails to power
up, you will hear the Self
Test Fail Tone
(
).
The radio will need to be
returned for re-
programming.
English
18

RADIO ON MESSAGE

At power up the radio may display a message
customised by your dealer, e.g.:
RADIO ON
After this text has been displayed, the radio
performs a self test routine. During the routine the
Green LED lights. On completion of a successful
self test the radio produces the Self-Test pass Tone,
the Green LED indicator goes out and the display
shows the channel that was in use at power down,
typically:
OFF
CHAN
This may be a number or an alias and will be the
current channel.

ADJUSTING THE VOLUME

Turn the On/Off/Volume Control knob clockwise to
increase the volume, or counterclockwise to
decrease the volume.
–
–
or
use the pre-programmed Volume Set button
1
Hold down the Volume Set button; you will
hear a continuous tone.
2
Turn the On/Off/Volume Control knob to the
desired volume level.
3
Release the Volume Set button.
32