Motorola CP180 Service-informatie - Pagina 9

Blader online of download pdf Service-informatie voor {categorie_naam} Motorola CP180. Motorola CP180 46 pagina's. Uhf2 (438-470mhz)
Ook voor Motorola CP180: Basis gebruikershandleiding (16 pagina's), Basis gebruikershandleiding (16 pagina's), Basis gebruikershandleiding (18 pagina's), Gedetailleerde servicehandleiding (28 pagina's), Cps/Tuner Installatiehandleiding (6 pagina's), Service-informatie (46 pagina's)

Motorola CP180 Service-informatie
1.0

Introduction

This Chapter provides a detailed theory of operation for the UHF circuits in the radio. Schematic
diagrams and board layout diagrams are included in Chapter 4 in this Section of the manual.
2.0
UHF (465-495MHz) Receiver
The UHF receiver covers the range of 465-495 MHz and provides switchable IF bandwidth for use
with 20/25/30 kHz or 12.5 kHz channel spacing systems. The receiver is divided into two major
blocks, as shown in Figure 2-1.
Front End
Back End
RX from
Antenna Switch
Preselector
RF
Filter
Amp
First LO
from Synthesizer
Recovered Audio
RSSI
Figure 2-1 UHF Receiver Block Diagram

THEORY OF OPERATION

Interstage
Crystal
Filter
1st Mixer
Inj Filter
6G
Ceramic
Resonator
Demodulator
12.5kHzFilter
Chapter 2
IF
Amp
Filter
BW_SEL
6E
Cer Fltr
Switching
4E