Motorola GP68 Bedieningshandleiding - Pagina 7

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Motorola GP68. Motorola GP68 20 pagina's. A high performance radio in a class of its own
Ook voor Motorola GP68: Installatie- en bedieningshandleiding (44 pagina's), Bedieningshandleiding (19 pagina's), Handmatig (18 pagina's), Servicehandleiding (13 pagina's)

Dealer Program Mode (DPM) - To Enter Dealer Programming Mode

Switch Radio Off.

Hold Down the PTT Monitor and Scan Buttons While Turning the Radio On.

Proceed to Program Radio. When programming is complete...

To Exit Dealer Programming Mode

Switch Radio Off.

Hold Down the PTT, Monitor and Enter Buttons While Turning the Radio On.

(Secure Keyboard Lock Procedure) This will protect all of your critical programmed

parameters from being tampered with.

Note: When the GP68 is in programming mode it will not transmit or receive until

you exit from dealer programming mode.

Overview of the Programming Process

The following procedures assume that you have read and understood the basic

operation of the GP68 from the GP68 User's Manual. A Dealer's radio is the radio

where all the necessary options are programmed into. A User's radio is the radio

whose options are cloned from the Dealer's radio; it is this radio that is given to the

customer. To enable the programming function in the Dealer's radio, remove jumper

R417. If the "dot" between the CH & channel number is flashing, the jumper has

already been removed and the radio can be field programmed.

If the Dealer's radio is to be given to the customer, remember to place

R417 with a 51K resistor to disable the programming function.

If you are unable to program the GP-68, either jumper R417 has not been

removed, or your dealer has replaced it with a 51K ohm resistor to prevent

IMPORTANT

end-user programming.