Motorola Mag One BRP 40 Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Motorola Mag One BRP 40. Motorola Mag One BRP 40 2 pagina's.
Pagina afdrukken
LED Indicator
• Colours indicate various states
of the radio
On/Off and Volume Knob
• Turn clockwise to turn radio ON
and increase volume.
• Turn counter-clockwise to decrease
volume and turn radio OFF.
Push-to-Talk (PTT) button
• Press to transmit and release
to receive messages.
Programmable Buttons
• Frequently used features can
be programmed here.
Accessories
Types
Part No.
Antenna
PMAD4051_R
PMAE4020_R
Audio Accessory PMMN4008_
PMLN4442_
PMLN4443_
PMLN4445_
PMLN4294_
PMLN4605_
PMLN4606_
PMLN4658 _
Battery
PMNN4071_R
Carry Accessory PMLN4743_
PMLN4691_R
PMLN4741_
PMLN4742_
Charger
PMLN4685_R
PMLN4738_R
PMLN4682_R
PMLN4683_R
PMLN4829_R
PMLN4822_R
*Caution: Your radio does not support the VOX feature. Please set the accessory switch to 'PTT'. If the accessory switch
is set to 'VOX', your radio transmits constantly and never receives.
Channel Knob
• Turn knob to change channel.
Accessory Connector
• To connect compatible acces-
sories to radio.
Programming Port
• To program the radio.
Speaker
• Where received messages are
heard.
Microphone
• Speak into microphone when send-
ing message.
Description
Mag One 150-174MHz Antenna
Mag One 450-470MHz Antenna
Remote Speaker Microphone
Earbud with in-line mic and PTT/VOX
Switch
*
Ear Receiver with in-line mic and PTT/VOX
Switch
*
Ultra Lightweight Headset with In-line PTT/VOX
*
Earbud with Microphone & PTT Combined
Clear Acoustic Kit
2-Wire Surveillance Kit with Clear Acoustic Tube
D-shell Earset with Boom Mic with PTT/VOX
Switch
*
Mag One NiMH batt 1200mAH
Mag One Spring Belt Clip
Mag One Belt Clip
Mag One Soft Leather Carry Case
Mag One Hard Leather Carry Case
Mag One Mid-rate Charger Base Only
Mag One Mid-rate Charger Kit, 120 V
Mag One Slow Charger Base Only
Mag One Slow Charger Kit, 120 V
Mag One Mid-rate Transformer, 120 V
Mag One Slow Transformer, 120 V
LED Indicators
Red
Green
Orange
Audio Alert Tones
Tone Name
In Chirp Tone
Out Chirp Tone
Bad Key Chirp
Tone
Talk Prohibit
Tone
Low Battery
Alert Tone
Priority
Channel Alert
Tone
Low Tone
Programmable Buttons
• The following functions can be assigned as short press (press and release) or long press (press and hold
for 1 second) in the programmable buttons.
Button
High/Low Power
Volume Set
Monitor
Switch
*
Sticky Monitor
Scan
Nuisance Channel Delete
Repeater/Talkaround
PL/DPL
Button Lock
Battery Save Mode
Squelch
No Operation
†
In Chirp Tone
*
Out Chirp Tone
• Your radio's default functions are described below. If re-programmed, enter the new functions .
Press Type
Short Press
Long Press
Colour
State
Indication
Illuminated
Radio is transmitting.
Blinking
Battery voltage is low.
Illuminated
Radio is receiving with PL/DPL disabled.
Blinking
Radio is in active scanning mode.
Illuminated
Radio is receiving with PL/DPL enabled.
Blinking
An error has occured.
Tone Cadence
Programmable buttons are pressed.
Programmable buttons are pressed.
Invalid programmable button function (i.e. pressing
programmable button while button lock is activated.)
Continuous tone is heard if PTT is pressed when transmit is
not allowed.
Repeating tone heard if battery level is low.
Received priority channel in Priority Scan mode.
High Tone
Function
†
Selects desired power level to High
or Low
Allows you to check the audio and alert tone volume level.
Allows you to monitor the current channel for activity; disables squelch.
The radio monitors continually until you press this button again.
Starts
*
or Stops
†
channel scan.
†
Removes unwanted channel(s) temporarily from scan list during scan.
Toggles radio between functioning in Repeater mode
Enables
†
/Disables
*
radio from requiring matching PL/DPL to receive messages.
*
†
Locks
or unlocks
all buttons except PTT, Channel Knob and On/Off/Volume Knob.
Toggles between functioning with Battery Saver ON
†
Selects desired squelch level: Normal
or Tight
No function is programmed to this button.
Programmable Button 1
Default
Re-programmed
Monitor
Sticky Monitor
Nusiance Channel Delete
Description
*
.
†
*
or Talkaround mode
.
*
or Battery Saver OFF
†
.
*
.
Programmable Button 2
Default
Re-programmed
Scan