Motorola H12 - MOTOPURE H12 - Headset Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Motorola H12 - MOTOPURE H12 - Headset. Motorola H12 - MOTOPURE H12 - Headset 15 pagina's. Universal bluetooth headset
Ook voor Motorola H12 - MOTOPURE H12 - Headset: Snelstarthandleiding (8 pagina's), Handmatig (16 pagina's), Snelstarthandleiding (2 pagina's), Snelstarthandleiding (4 pagina's)
![Motorola H12 - MOTOPURE H12 - Headset Gebruikershandleiding](/uploads/products/server2/6117140/6117140.png)
Insert the new battery. Make sure you match the positive and negative
markings on the battery with those on the pager housing.
Align the grooves on the battery door with the grooves on the pager housing
and slide the battery door closed.
Slide the battery door lock toward the bottom of the pager to lock the
battery door.
Note: Installing the battery incorrectly could result in resetting the alert
mode and time to their default settings, and in deleting all messages.
Turning Your Pager On
Press
to turn your pager on. A start-up message is momentarily
u
displayed and your pager activates the currently selected alert.
Press any button to stop the start-up alert. While the pager is on and no
activity is taking place, the Status screen is displayed.
Battery status
(Full)
L
H Y
›
Power
On
(Blank screen)
Alert
Mode
(Audible)
Status Screen example
Turning Your Pager Off
From any screen, press and release
flashing.)
e
Press
to move to
v
(TURN OFF).
Press
to turn the pager off. The TURN OFF? prompt is displayed.
t
Press
again. The pager is now off and the screen is blank.
t
Time
Day and Date
m
):))
)%/)!
until ESCAPE is displayed. ( z is
t
Control Buttons and Status Screen
Pager
Status
Folders
Directional
Buttons
On/Read
u
Function/
t
Select
Directional
x s
v w
3
4
Backlight
Your pager's display can be illuminated in low light conditions. You can
manually turn the backlight on and off by pressing and holding
two seconds.
Sending a Test Page to Yourself
It's a good idea to test your pager and service by sending a page to yourself.
Start by using the phone number, web site or email address (and PIN, if
required) your service provider gave you, then enter a short message. If you are
sending a word message from a phone, an operator will assist you; otherwise
press the phone buttons to enter a numeric message or type a message and
send it. While you are waiting for the message to reach your pager, refer to
page 14 for more information about how to read a message.
If your pager does not receive the message within a few minutes, contact your
service provider. After you've tested your pager, read the rest of this guide to
learn about the many useful features of your new pager.
5
6
HY L ):)) m )%/)!
DDDD
IbIIIIIILI55555555
R q h a o b
ESCAPE
h aob
eijmkezBq
On/Read
Button
Function/Select
Button
Used to turn the pager on and to read a
message.
Used to display the Function menu and to
select pager settings.
Used to move around the display and
through menus.
for at least
t