Motorola MOTOSTART HS805 Gebruikershandleiding
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Motorola MOTOSTART HS805. Motorola MOTOSTART HS805 1 pagina's. Bluetooth® handsfree headset
Pagina afdrukken
HS805
Bluetooth®
Handsfree Headset
Get Connected in
4 Quick Steps
1 - BATTERY
2 - START
BLUETOOTH
FEATURE
3 - PAIR
4 - TEST AND
USE
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196 USA
Guide Number: 6809492A70-A
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office.The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2005.
BEFORE YOU
BEGIN
Before using this product, read the Important Safety and Legal
Information included in your phone's user's guide, and follow
its instructions.
Take a moment before you get started to
familiarize yourself with your new
HS805 Headset.
Call
Button
Volume
Buttons
Indicator Light
3
PAIR
CONTINUED
Your Phone
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
Menu
>
1
On your Motorola phone, press
(
)
M(
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
2
Select
Motorola HS805.
3
Select
OK
or
Yes
to pair your headset with
your phone.
4
Enter the passkey:
0000
5
Select OK.
When your headset successfully pairs with
your phone, the indicator light changes from
steadily lit to flashing.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
1
BATTERY
Your HS805 Headset
Insert a new battery into your headset:
1
Open the battery door at the back of the
headset.
2
Insert a new battery so the + and -
markings match the markings in the
battery compartment.
3
Close the battery door.
4
TEST AND USE
Your phone and headset are now paired
and ready to make and receive calls.
To make a call:
1
Place the headset over your ear.
2
On your phone, dial the number you want
to call and press the SEND key.
3
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
To save battery power, turn OFF the
headset when you don't use it for an
extended time.
2
START BLUETOOTH
FEATURE
Your Phone
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
For most Motorola phones:
Menu
> Settings > Connection >
1
Press
M(
(
)
Bluetooth Link > Setup.
2
Scroll to
Power.
3
Select
Change.
4
Scroll to
On.
5
Press
Select
to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
QUICK TIPS
To turn on the headset, press and hold the
Call E button on your headset until the LED
indicator begins flashing. The indicator light
blinks when the power is on.
To answer or end a call, press the
Call E button on the headset.
To adjust the volume, press the Volume
buttons on the headset.
NOTE: The Volume buttons are initially set up
for wearing your headset on your right ear (like
shown in step 3)--with the top button used to
increase volume. You can set which button is
used to increase volume by pressing and
holding the desired Volume button (along with
the Call E button) while turning on the
headset.
To turn off the headset, press and hold the
Call E button on your headset for 5 seconds.
The indicator light will flash rapidly and then
stop flashing.
3
PAIR
Your Headset
Before you can use your headset, you must pair
(link) it with your phone.
Step A - PUT THE HEADSET IN PAIRING
MODE
Indicator Light
1
Ensure the headset is turned off (indicator
light not blinking).
2
Press and hold the Call E button for 6 to 10
seconds. The indicator light will initially flash,
but continue to hold down the button until
the indicator light is steadily lit.
If the indicator light is flashing or not steadily
lit when releasing the button, repeat both
steps 1 and 2 on this page.
TROUBLESHOOTING
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on and steady when your phone is searching
for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).