Motorola SM56 Gebruikershandleiding Snel aan de slag - Pagina 3

Blader online of download pdf Gebruikershandleiding Snel aan de slag voor {categorie_naam} Motorola SM56. Motorola SM56 13 pagina's. Software modem
Ook voor Motorola SM56: Gebruikershandleiding Snel aan de slag (22 pagina's), Gebruikershandleiding Snel aan de slag (48 pagina's), Referentiehandleiding At-opdrachten (42 pagina's)

Speakerphone Modem

You can check which modem you have by selecting Start->Settings ->Control Panel, and then

double click on the Modems icon. The modem name will appear in the Modem Properties window.

Preparing the Computer For Installation

To ensure problem-free installation ensure that an unused COM port is available. The SM56 install

program interrogates lower COM ports (below COM 5) and installs the modem on the first

available and unused port. Although the SM56 functions perfectly on any available COM port,

some communications applications may not be able to use the modem if it gets installed above

COM 4. Refer to the Troubleshooting section in this document for information on how to force the

modem onto a COM port below COM 5 after install is complete.

1. Power down the computer.

2. Locate the connector (AC-Link, CNR, PCI. Mini PCI, etc.) on the motherboard, and carefully

insert the SM56 modem board.

3. Connect the Wall jack on the modem board to an analog phone jack using an RJ-11 phone cable.

If your modem board also has a telephone handset jack, make sure to not plug the telephone

line into that jack. The jacks will be labeled with a little icon and/or text indicating which is

which.

4. Power ON the computer.

Important: When using the SM56 modem, or any modem for that matter, you should always

connect the modem line input to a direct analog telephone line. This will maximize modem

performance by avoiding any problems introduced by internal PBX systems, etc.

Installing the Modem on Windows 98, Millennium,

Windows 2000 and Windows XP

(Note : The Install Wizard may vary slightly with different versions of the OS and different service

packs)

On starting Windows for the first time after installing the modem Plug and Play (PnP) detects the

new hardware and begins an install wizard for the modem. The modem is detected as a new PCI

• Telephone answering

machine (TAM)

• Caller ID

• Distinctive ring

• Full-duplex speakerphone