AEMC instruments L452 Snelstarthandleiding - Pagina 7
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} AEMC instruments L452. AEMC instruments L452 17 pagina's.
Pagina afdrukken4. Click OK to confirm setup. The InstallShield Wizard screen will appear. This
program leads you through the DataView install process. As you complete these
screens, be sure to check the Data Loggers option when prompted to select
features to install.
5. When the InstallShield Wizard finishes installing DataView, the Setup screen will
appear. Click Exit to close. The DataView folder will appear on your computer
desktop.
6. Open the DataView folder on your desktop. This folder contains the DataView,
Data Logger Control Panel icons, and any other installed Control Panel(s).
Connecting via USB Cable
The following steps assume that the instrument has not been previously connected to
the computer via USB cable:
1. Plug one end of the cable into the instrument and the other end into an available
USB port on the computer. Then, press and hold the
POWER ON appears on the LCD. Wait for driver installation to finish before
proceeding to the next step (a message will appear on your computer when driver
installation is complete).
2. Open the Data Logger Control Panel.
3. In the menu bar at the top of the screen, select Help. In the drop-down menu that
appears, click the option Help Topics to open the Data Logger Control Panel Help
system.
4. Use the Contents window in the Help system to locate and open the topic
"Connecting to an Instrument," which describes how to connect the Model L452 to
the computer.
When the instrument is connected, its name will appear under the Data Logger
Network in the Control Panel's navigation frame.
Connecting via Bluetooth
Bluetooth must be enabled and configured on the instrument before you can connect
to the computer:
1. At the "home" (Channel 1 & 2 Measurement Data) screen, press ► four times to
display the Language and Date/Time Format screen. Then, press ▼ four times to
display the Bluetooth Enabled/Visibility screen.
2. To change the Bluetooth setting, press
toggle between Enabled and Disabled. When the desired option is displayed,
press
to save the selection and leave edit mode. When the Enabled option is
selected, the Bluetooth icon
3. To change the Visibility setting, press
▼ to select the Visibility field. Press
toggle between Visible and Invisible. To connect the instrument for the first time,
this should be set to Visible. When the desired option is selected, press
save the setting and leave edit mode.
4. To change the instrument's Bluetooth name, press ▼ at the Bluetooth Enabled/
Visibility screen. This will display the Bluetooth Name screen.
twice and use the ▲ or ▼ button to
will appear in the icon bar.
to initiate selection mode. Then, press
to initiate edit mode and use ▲ or ▼ to
button until the message
to