Epson 1640XL - Expression Graphic Arts Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson 1640XL - Expression Graphic Arts. Epson 1640XL - Expression Graphic Arts 22 pagina's. Color image scanner
Ook voor Epson 1640XL - Expression Graphic Arts: Gebruikershandleiding (7 pagina's), Brochure & specificaties (24 pagina's), Productinformatie (9 pagina's), Start hier Handleiding (8 pagina's), Specificaties (2 pagina's), Product ondersteunings bulletin (23 pagina's), Handmatig (11 pagina's), Update (1 pagina's), Product ondersteunings bulletin (40 pagina's), Product ondersteunings bulletin (17 pagina's), Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (24 pagina's), Product ondersteunings bulletin (29 pagina's), Product ondersteunings bulletin (8 pagina's), Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (11 pagina's), Product ondersteunings bulletin (14 pagina's), Product ondersteunings bulletin (18 pagina's), Product ondersteunings bulletin (12 pagina's), Product ondersteunings bulletin (40 pagina's), Product ondersteunings bulletin (11 pagina's), Product ondersteunings bulletin (40 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (12 pagina's), Product ondersteunings bulletin (21 pagina's), Product ondersteunings bulletin (12 pagina's), Handmatig (23 pagina's)

Epson 1640XL - Expression Graphic Arts Gebruikershandleiding
8. Connect the transparency unit's
connector to the option
(
) connector at the
ADF/TPU
back of the scanner. Tighten the
attached screws to secure
the connector.
If you haven't connected the scanner to your computer, see the Start Here sheet for
instructions. Then plug the scanner in and turn it on.
See Chapter 2 for scanning instructions.

Using the Film Guides

You can use the four film guides that came with the scanner to scan 35 mm slides,
strips of 35 mm negative or positive film, 120-size or 220-size format film, and
×
4
5-inch film.
When using the film guides, be sure the transparency unit is
completely closed and the calibration area (next to the notch on the
transparency guide) is uncovered or an error will occur and you will be
unable to scan.
Store the reflective document mat in the transparency unit pocket
when not in use.