Epson 1815p - PowerLite XGA LCD Projector Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson 1815p - PowerLite XGA LCD Projector. Epson 1815p - PowerLite XGA LCD Projector 27 pagina's. Release of check tool for network projectors v1.00 for windows
Ook voor Epson 1815p - PowerLite XGA LCD Projector: Gebruikershandleiding (42 pagina's), Bedieningshandleiding (36 pagina's), Bedieningshandleiding (47 pagina's), Snelle installatie (2 pagina's), Gebruikershandleiding (1 pagina's), Functiehandboek (5 pagina's), Software Handleiding (2 pagina's), Conformiteitsverklaring (4 pagina's), Onderdelenlijst (1 pagina's), Product ondersteunings bulletin (45 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (34 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's)

Pagina afdrukken

Epson 1815p - PowerLite XGA LCD Projector Gebruikershandleiding

Using the Projector Security Features

To prevent unauthorized use of the projector, you can assign a

password to prevent the projector from being turned on; create

a custom screen that is displayed at startup and/or when the

button is pressed; or disable the projector's buttons.

A/V Mute

You can also attach a security cable to the projector to prevent

theft.

Enabling Password Protection

The default setting for the password is

to create a new password:

1. Press the

button on the remote control for about five

Freeze

seconds.

You see this screen:

2. Use the

pointer button to select

Enter

3. When you see a message asking if you want to change the

password, select

and press

Yes

4. Hold down the

button on the remote control and use

Num

the numeric keypad to enter a four digit password.

5. When you see a confirmation message, reenter the password.

Then press the

button to exit the screen.

To set security options, access the Password Protect screen as

described above, and then turn on any of the following options:

❏

to prevent unauthorized use of the

Power On Protect

projector. After the projector is plugged in and turned on,

you must enter a password to use the projector.

❏

to prevent your custom screen and

User's Logo Protect

display settings from being changed. None of the User's

Logo features in the Extended menu can be changed when

the User's Logo Protect function is enabled.

❏

to lock the Network settings in the menu

Network Protect

system (PowerLite 1815p only).

Caution: If you lose the remote control, you will not be able to enter

the password. Keep the remote control in a safe place at all times.

Also, it's a good idea to write down your password.

. Follow these steps

0000

and press

Password

Enter

Starting the Projector with a Password

When the password function is enabled, you see this screen

when you plug in and turn on the projector:

Hold down the

Num

numeric keypad to enter the four-digit password. The password

screen closes and projection begins.

If the password is not correct, you see a message prompting you

to re-enter it. If you enter an incorrect password three times in

succession, you see the message

and the projector switches to standby mode.

be locked

Disconnect the projector's power cord from the electrical outlet,

reconnect it, and turn the projector back on.

When you see the Password screen again, you can try to enter

the correct password. If you enter an incorrect password 30

times in succession, the projector remains locked and you must

contact Epson to unlock it. If you have forgotten the password,

contact Epson with the request code number that appears in the

Password screen for assistance.

Note: If you leave the projector plugged in, the Password Protect

Release screen will not appear. It appears only if you unplug and

reconnect the power cable.

Disabling the Projector's Buttons

When you enable the Operation Lock function, you can lock all

the projector's buttons, or all buttons except the P

button. The remote control can still be used to operate the

projector.

1. Press the

button, highlight the

press

Enter

2. Select

Operation Lock

3. Select

(to lock all projector buttons) or

Full Lock

(to lock all buttons except the

Lock

press

Enter

3/08

PowerLite 1810p/1815p

button on the remote control and use the

The projector's operation will

Setting

and press

Enter

button) and

Power

PowerLite 1810p/1815p

Power

menu, and

Partial