Epson 4000 - Stylus Pro Color Inkjet Printer Snelle referentiehandleiding - Pagina 7

Blader online of download pdf Snelle referentiehandleiding voor {categorie_naam} Epson 4000 - Stylus Pro Color Inkjet Printer. Epson 4000 - Stylus Pro Color Inkjet Printer 11 pagina's. Print engine
Ook voor Epson 4000 - Stylus Pro Color Inkjet Printer: Brochure & specificaties (4 pagina's), Handleiding voor productreferenties (38 pagina's), Productinformatie (13 pagina's), Start hier Handleiding (6 pagina's), Product ondersteunings bulletin (17 pagina's), Belangrijke informatie (2 pagina's), Beperkte garantie (12 pagina's), Brochure & specificaties (12 pagina's), Brochure & specificaties (6 pagina's), Installatiehandleiding (16 pagina's)

Replacing Printer Parts (continued)

Hold down the side pin, as shown, then turn the

latch to the right.

Release the side pin and carefully remove the

cutter blade.

Insert the new cutter blade.

Hold down its side pin and secure it with

the latch.

Close the top cover. The carriage returns to the

home position and the cutter replacement is

complete.

Replacing the Maintenance Tank

You need to replace the Maintenance Tank

(part # C12C890071) when you see MNT TNK FULL

or NEAR FULL on the LCD display. The ink light

also turns red.

If you are using 220 ml ink cartridges, remove the

four cartridges on the right. Close the ink

compartment cover.

Pull out the maintenance tank as shown.

Caution:

Do not tip the tank, or ink may spill out.

Place the used tank in the plastic bag included with

the new tank.

Insert the new tank.

Replace any ink cartridges you removed.