Epson 4880 - Stylus Pro Color Inkjet Printer Netwerkhandleiding - Pagina 43

Blader online of download pdf Netwerkhandleiding voor {categorie_naam} Epson 4880 - Stylus Pro Color Inkjet Printer. Epson 4880 - Stylus Pro Color Inkjet Printer 46 pagina's. Ink fill for the refillable cartridge system
Ook voor Epson 4880 - Stylus Pro Color Inkjet Printer: Beknopte installatiehandleiding (1 pagina's), Installatiehandleiding (4 pagina's), Handleiding productinformatie (16 pagina's), Beperkte garantie (12 pagina's), Gebruiksaanwijzing (5 pagina's)

1. From the command line, type:

Example: arp -s 192.168.100.201 00-00-48-93-00-00

2. Execute the ping command to set the IP address by pinging it: Example:

ping 192.168.100.201

3. The network interface should now respond to the ping. If it does not, you may have

incorrectly typed the MAC address or the IP address in the arp -s command.

Double-check and try again. If none of these actions are effective, re-initialize the

network interface and try again.

4. Print a status sheet to check whether the new IP address has been assigned to the

network interface.

Note:

When the IP address is set by the ping command, the subnet mask is automatically changed

by the class of the IP address. To change the subnet mask and the default gateway according

to your network environment, use EpsonNet Config for Windows or Macintosh.

Uninstalling Software

Follow the steps below to uninstall the network software.

1. Click Start, click Control Panel, and then click Uninstall a program.

2. Select the utility you want to uninstall, and then click the Uninstall/Change button.

3. Follow the on-screen instructions to complete uninstallation.

1. Click Start, click Control Panel, and then click Add or Remove Programs.

2. Click the Change or Remove Programs icon.

3. Select the utility you want to uninstall, and then click the Change/Remove button.

4. Follow the on-screen instructions to complete uninstallation.

Tips for Administrator