Epson 755c - PowerLite XGA LCD Projector Snelle installatie

Blader online of download pdf Snelle installatie voor {categorie_naam} Epson 755c - PowerLite XGA LCD Projector. Epson 755c - PowerLite XGA LCD Projector 2 pagina's. Release of check tool for network projectors v1.00 for windows
Ook voor Epson 755c - PowerLite XGA LCD Projector: Gebruikershandleiding (42 pagina's), Bedieningshandleiding (36 pagina's), Specificatieblad (2 pagina's), Onderdelen (26 pagina's), Bedieningshandleiding (47 pagina's), Product ondersteunings bulletin (30 pagina's), Door gebruiker vervangbare onderdelen (1 pagina's), Installatiehandleiding (19 pagina's), Gebruikershandleiding (1 pagina's), Functiehandboek (5 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (12 pagina's), Product ondersteunings bulletin (42 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (34 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's)

Pagina afdrukken

Epson

Turn On Your Equipment

Connect the power cord to the back of the projector and plug the other

end into an electrical outlet.

Remove the lens cover.

Remove the battery cover on the remote control. Locate the batteries

that came with the projector and insert them as shown. Then replace

the battery cover.

To turn the projector on, press the red

projector or the remote control. The projector beeps once, and the

projector's Power light flashes green and then stays on.

CAUTION: Before unplugging the projector...

Shut the projector down properly:

1. Press the

Power button twice.

2. When the orange light stops flashing and the projector beeps,

you can unplug the projector.

Adjust the Image

To raise the image, press the blue foot release button for the front

adjustable foot and lift the front. Release the button to lock the

foot in position.

PowerLite

755c/ 765c

Quick Setup

Power button on the

Turn the focus ring to sharpen the image.

Turn the zoom ring to reduce or enlarge the image.

Focus

If your image looks like

to one side of the screen at an angle. Place it directly in front of the

screen, facing the screen squarely.

If your image looks like

the projector to correct it.

Choose a

Presentation Method

How do you want to get images to the projector?

•

To connect to a notebook, see "If connecting

to a notebook" below.

•

To project over an 802.11g/b network, see

"If projecting wirelessly" on the back of this sheet.

You must have installed the projector's EasyMP

software and configured your projector and

computer before you can project wirelessly.

See your User's Guide for instructions.

•

To give a presentation stored on a memory card,

see Chapter 5 in your User's Guide.

If connecting to a notebook...

Make sure you've turned on the projector and adjusted the image

as described in sections 1 and 2.

Locate the computer cable that came with the projector. Connect

one end to the projector's blue Computer/Component Video port.

Connect the other end to your notebook's video-out port or

monitor port. If you can't connect the cable to your

PowerBook

, you may need to use an adapter. See your

PowerLite 755c/765c User's Guide for instructions.

Press the Source Search button on the projector until your

computer image is displayed.

Zoom

, you've placed the projector off

, press the

buttons on

Computer cable

Wireless card