Epson 835p - PowerLite XGA LCD Projector Snelle installatie

Blader online of download pdf Snelle installatie voor {categorie_naam} Epson 835p - PowerLite XGA LCD Projector. Epson 835p - PowerLite XGA LCD Projector 4 pagina's. Release of check tool for network projectors v1.00 for windows
Ook voor Epson 835p - PowerLite XGA LCD Projector: Gebruikershandleiding (42 pagina's), Bedieningshandleiding (36 pagina's), Bedieningshandleiding (47 pagina's), Product ondersteunings bulletin (30 pagina's), Aanvullende handleiding (1 pagina's), Brochure & specificaties (4 pagina's), Productinformatie (21 pagina's), Installatiehandleiding (19 pagina's), Gebruikershandleiding (1 pagina's), Technisch overzicht (7 pagina's), Functiehandboek (5 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (12 pagina's), Product ondersteunings bulletin (42 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (34 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's), Specificatieblad (4 pagina's)

Turn On Your Equipment

Connect the power cord to the back of

the projector and plug the other end

into a grounded outlet.

Remove the lens cover.

Remove the battery cover on the remote

control. Locate the batteries that came

with the projector and insert them as

shown. Then replace the battery cover.

Push up the remote control's ON/OFF

switch to turn it on.

To turn on the projector, press the red

or the remote control. The projector beeps once, and the projector's

Power light flashes green and then stays on.

CAUTION: Before unplugging the projector...

Shut the projector down properly:

1. Press the

Power light flashes orange (about 30 seconds).

2. Once the light stops flashing and stays on, it's safe to unplug

the projector.

To raise the image, press the blue foot release button for the front

adjustable foot and lift the front. Release the button to lock the

foot in position.

EPSON

Power button twice. Let the projector cool while the

PowerLite

Quick Setup

Power button on the projector

835p

ON/OFF

switch